How do I apply this patch? Matt Maher Peterson APANA w: 360.746.2276x401 c: 360.393.5549
On Tue, Dec 8, 2015 at 4:45 PM, Robert Nelson <[email protected]> wrote: > On Tue, Dec 8, 2015 at 6:01 PM, Matt Maher Peterson > <[email protected]> wrote: > > So I was able to to get the custom dtbo loaded after recompiling it with: > > > > dtc -O dtb -o BB-APA-01-00A0.dtbo -b 0 -@ BB-APA-02-00A0.dts > > > > Did the UARTS get renamed? I also had to remove this from the dts to get > it > > to comiple: > > > > fragment@4 { > > target = <&uart6>; > > __overlay__ { > > pinctrl-names = "default"; > > pinctrl-0 = <&uart5_pins>; > > status = "okay"; > > }; > > }; > > Yeap: > > > https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-UART5-00A0.dts#L44 > > > > > > Doesn't seam to be loading on boot despite having entered it in > > /boot/uEnv.txt: > > > > cape_enable=capemgr.enable_partno=BB-APA-01 > > cape_enable=bone_capemgr.enable_partno=BB-APA-01 > > > > > > > > > > > I can manually load it: > > > > root@mmpTestBox:/sys/class/gpio# cat > > /sys/devices/platform/bone_capemgr/slots > > 0: PF---- -1 > > 1: PF---- -1 > > 2: PF---- -1 > > 3: PF---- -1 > > root@mmpTestBox:/sys/class/gpio# sh -c "echo 'BB-APA-01' > > > /sys/devices/platform/bone_capemgr/slots" > > root@mmpTestBox:/sys/class/gpio# cat > > /sys/devices/platform/bone_capemgr/slots > > 0: PF---- -1 > > 1: PF---- -1 > > 2: PF---- -1 > > 3: PF---- -1 > > 4: P-O-L- 0 Override Board Name,00A0,Override Manuf,BB-APA-01 > > > > After manually loading it: > > > > Now I have an issued with ADC.setup() from the adafruit library. Wasn't > an > > issue before I update: > > > > /powerMGMT.py", line 46, in shorePowerCheck > > ADC.setup() > > RuntimeError: Unable to setup ADC system. Possible causes are: > > - A cape with a conflicting pin mapping is loaded > > - A device tree object is loaded that uses the same name for a > fragment: > > helper > > There's a patch in this thread: > > > https://github.com/adafruit/adafruit-beaglebone-io-python/issues/80#issuecomment-161431164 > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/P4ZzSJ49grk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
