Doh, I just realized you're working with a 3.8.x kernel . . . These instructions above I believe will only work with 4.x, as that's what the sourced in this repo are meant for. However, I bet the device tree source files are exactly the same. But unsure if dt-bindings are different or not.
On Tue, Dec 15, 2015 at 4:45 AM, William Hermans <[email protected]> wrote: > Well I was attempting to create a *.dtbo file from the source, but here > this works: > > $ git clone https://github.com/RobertCNelson/dtb-rebuilder.git > Cloning into 'dtb-rebuilder'... > remote: Counting objects: 6357, done. > remote: Compressing objects: 100% (12/12), done. > remote: Total 6357 (delta 3), reused 0 (delta 0), pack-reused 6343 > Receiving objects: 100% (6357/6357), 4.38 MiB | 344 KiB/s, done. > Resolving deltas: 100% (2563/2563), done. > > $ cd dtb-rebuilder/ > > $ make src/arm/am335x-bonegreen.dtb > DTC src/arm/am335x-bonegreen.dtb > > $ cp src/arm/am335x-bonegreen.dtb . > > $ ls > Bindings COPYING Makefile README *am335x-bonegreen.dtb* > dtc-overlay.sh include scripts src > > On Tue, Dec 15, 2015 at 4:26 AM, William Hermans <[email protected]> > wrote: > >> strace output >> >> http://pastebin.com/8ype90wD >> >> I'm looking into it. >> >> On Tue, Dec 15, 2015 at 4:16 AM, William Hermans <[email protected]> >> wrote: >> >>> *One additional note: That git has the *bonegreen* dts file in it >>>> already. So git cloning that git, and running dtc in the src/arm/ directory >>>> for that file should just work.* >>>> >>> >>> Following these line of reasoning, I get the same error. hmmm give me a >>> minute. >>> >>> On Tue, Dec 15, 2015 at 4:01 AM, William Hermans <[email protected]> >>> wrote: >>> >>>> One additional note: That git has the *bonegreen* dts file in it >>>> already. So git cloning that git, and running dtc in the src/arm/ directory >>>> for that file should just work. >>>> >>>> On Tue, Dec 15, 2015 at 3:58 AM, William Hermans <[email protected]> >>>> wrote: >>>> >>>>> Your problem is very likely that you do not have the files >>>>> >>>>> #include "am33xx.dtsi" >>>>> #include "am335x-bone-common.dtsi" >>>>> >>>>> >>>>> In your path. I get the same error here: >>>>> >>>>> $ dtc -O dtb -o am335x-bonegreen.dtbo -b 0 -@ am335x-bonegreen.dts >>>>> Error: am335x-bonegreen.dts:10.1-9 syntax error >>>>> FATAL ERROR: Unable to parse input tree >>>>> >>>>> So, you missed a step somewhere. Which kernel version will the target >>>>> be using ? This should be trivial to fix, but the only option I can think >>>>> of offhand is git cloning >>>>> https://github.com/RobertCNelson/device-tree-rebasing, and then >>>>> placing your *bonegreen* dts file into the <base git>/src/arm/ directory, >>>>> and compiling manually. As I have no idea which instructions you are >>>>> following, and what the steps are. >>>>> >>>>> *OR* >>>>> >>>>> Perhaps placing am33xx.dtsi and am335x-bone-common.dtsi in the same >>>>> directory as am335x-bonegreen.dts, and try again. I've never done this >>>>> personally, but it should work. In fact, I think it makes more sense than >>>>> the first option I mention above. With one caveat: I do not recall if >>>>> either of these include files have further dependencies in this git tree. >>>>> >>>>> On Mon, Dec 14, 2015 at 10:26 PM, Keith Conger <[email protected] >>>>> > wrote: >>>>> >>>>>> I'm trying to build a 3.8.13 kernel with the BBG patches from >>>>>> http://www.seeedstudio.com/recipe/373-how-to-compile-beaglebone-green-linux-kernel.html >>>>>> . >>>>>> >>>>>> I hit this error during the build: >>>>>> >>>>>> make[1]: Leaving directory >>>>>> `/home/keithconger/Projects/bbbandroid-bluez/kernel' >>>>>> make -C kernel ARCH=arm >>>>>> CROSS_COMPILE=/home/keithconger/Projects/bbbandroid-bluez/prebuilts/gcc/linux-x86/arm/arm-gnueabihf-4.7/bin/arm-linux-gnueabihf- >>>>>> dtbs >>>>>> make[1]: Entering directory >>>>>> `/home/keithconger/Projects/bbbandroid-bluez/kernel' >>>>>> DTC arch/arm/boot/dts/am335x-bone.dtb >>>>>> DTC arch/arm/boot/dts/am335x-boneblack.dtb >>>>>> DTC arch/arm/boot/dts/am335x-bonegreen.dtb >>>>>> Error: arch/arm/boot/dts/am335x-bonegreen.dts:45.15-16 syntax error >>>>>> FATAL ERROR: Unable to parse input tree >>>>>> make[2]: *** [arch/arm/boot/dts/am335x-bonegreen.dtb] Error 1 >>>>>> make[2]: *** Waiting for unfinished jobs.... >>>>>> make[1]: *** [dtbs] Error 2 >>>>>> make[1]: Leaving directory >>>>>> `/home/keithconger/Projects/bbbandroid-bluez/kernel' >>>>>> make: *** [kernel_build] Error 2 >>>>>> >>>>>> Line 45 and 46 are: >>>>>> 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ >>>>>> 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ >>>>>> >>>>>> Anyone know how to resolve this? >>>>>> >>>>>> Thanks >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> >>>> >>> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
