I'm using 3.8.13. In the kernel source I'm using BB-BONE-LCD4-01-00A1.dts does have that pin being used. I just found the article below. So I've removed the offending lines and I'm creating a new image to test.
https://accustrata.wordpress.com/2014/10/27/lcd4-cape-and-circuitco-adc-cape-working-together/ Thanks, Keith On Tuesday, December 15, 2015 at 8:02:28 PM UTC-7, RobertCNelson wrote: > > On Tue, Dec 15, 2015 at 8:46 PM, Keith Conger <[email protected] > <javascript:>> wrote: > > I've got my LCD working but I'm struggling with enabling UART2 with it > > connected. > > > > I'm getting a conflict between the two: > > [ 1.749303] bone-capemgr bone_capemgr.9: slot #5: BB-UART2 conflict > P9.21 > > (#3:BB-BONE-LCD4-01) > > > > What's weird is the LCD's datasheet doesn't show that pin being used. > > > > > http://www.4dsystems.com.au/productpages/4DCAPE-43/downloads/4DCAPE-43(T)_datasheet_R_1_9.pdf > > > I see no "P9.21" being used: > > > https://github.com/beagleboard/linux/blob/3.8/firmware/capes/BB-BONE-LCD4-01-00A1.dts > > > What source/kernel (uname -r) are you using? > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
