Hello Guys, is ther any solution for this usb hub issue? I have the same probleme.
best regards Gerhard Am Freitag, 11. September 2015 21:03:41 UTC+2 schrieb Wally Bkg: > > Just installed the 2015-09-06 Machinekit image and when booted it doesn't > pick up my USB mouse or keyboard attached to a powered hub. > I get the X display on my monitor and a mouse cursor which doesn't move. > I can login over ssh. While I realize ssh -X is generally better > performance, especially if using the 192.168.7.2 usb connection, but I need > a local mouse/keyboard and HDMI display for some things I'm working on. > > The bone-debian-8.1-lxqt-4gb-armhf-2015-08-16-4gb.img. works fine with > this exact setup. > > If I unplug the hub, plug in my Logitech USB wireless touchpad/keyboard > dongle and press the reset button I get a working mouse/keyboard after it > boots. > If I then hot unplug the dongle and plug in the hub, the USB > mouse/keyboard then work, If I also plug the dongle into the hub both > mouse and touchpad work as does both keyboards. > What gives? > > I need the hub because I need a mouse, keyboard, and webcam. Re-booting > with the dongle attached to the hub again yields no working mouse/keyboard. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
