Make sure the hub and all USB devices are connected at power-on, otherwise, try a different hub.
I have used the Logitech mouse/keyboard combos (various ones with a single USB receiver) as well as powered USB hubs successfully. The hub I typically use is built-in to various Dell monitors I picked up at surplus for use with the BBB. I honestly haven't seen much trouble with the USB ports (as long as you're not trying to hot-plug), but maybe I've just been lucky. Regardless, the Machinekit 3.8.13-xenomai kernel should support the same USB devices as the standard 3.8.13 kernel, so any USB tips or debugging help (for the 3.8.13 kernel) should apply. ...or if you're feeling particularly adventurous, you could work on trying to port to the 4.x kernel series (different cape manager and PRU support). On 1/4/2016 2:25 AM, [email protected] wrote: > Hello Guys, > is ther any solution for this usb hub issue? > > I have the same probleme. > > best regards > Gerhard > > Am Freitag, 11. September 2015 21:03:41 UTC+2 schrieb Wally Bkg: >> >> Just installed the 2015-09-06 Machinekit image and when booted it doesn't >> pick up my USB mouse or keyboard attached to a powered hub. >> I get the X display on my monitor and a mouse cursor which doesn't move. >> I can login over ssh. While I realize ssh -X is generally better >> performance, especially if using the 192.168.7.2 usb connection, but I need >> a local mouse/keyboard and HDMI display for some things I'm working on. >> >> The bone-debian-8.1-lxqt-4gb-armhf-2015-08-16-4gb.img. works fine with >> this exact setup. >> >> If I unplug the hub, plug in my Logitech USB wireless touchpad/keyboard >> dongle and press the reset button I get a working mouse/keyboard after it >> boots. >> If I then hot unplug the dongle and plug in the hub, the USB >> mouse/keyboard then work, If I also plug the dongle into the hub both >> mouse and touchpad work as does both keyboards. >> What gives? >> >> I need the hub because I need a mouse, keyboard, and webcam. Re-booting >> with the dongle attached to the hub again yields no working mouse/keyboard. >> >> > -- Charles Steinkuehler [email protected] -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
