Re: [beagleboard] blank flasher

[Tim Limon]

Hi Robert, I need your expertise here, please.  I am still unable to boot a production debian image from an SD card.  I’m stuck working with the paltry 2Gb eMMC.  I’ve included the log from the serial port during two boot attempts: one with S2 not depressed and one with S2 depressed.  Let me know what to do, please. —Tim  -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.

screenlog.0
Description: Binary data

On Jan 5, 2016, at 10:43 AM, Tim Limón <tim.li...@gmail.com> wrote: Spoke too soon. Bone-68 did not like to reboot.  it stalled again.  reflashing to start over again using the only working image. On Tue, Jan 5, 2016 at 10:20 AM, Tim Limón <tim.li...@gmail.com> wrote: I ended up downgrading the kernel thanks to your instructions: https://groups.google.com/forum/#!topic/beagleboard/LEMjcdgYM50 I'll give the eth0 a try tonight.  I also ordered a serial cable  :) On Tue, Jan 5, 2016 at 9:26 AM, Tim Limón <tim.li...@gmail.com> wrote: As far as the eth0 issue, I can configure and bring up with ifup but there is no communication with the router.  Pings remain unanswered, and the network sees the mac address, but no IP is assigned.  Also the lights on the Ethernet port are dead.  I have a working rev C board with 7.9 loaded.  I moved the /etc/network/interfaces file from that on onto the 8.3, with no luck.  I;m thinking at some point I may need to RMA the board Thank you for the help, by the way.  I appreciate your generosity. On Tue, Jan 5, 2016 at 9:13 AM, Tim Limón <tim.li...@gmail.com> wrote: I have no serial cable.   On Tue, Jan 5, 2016 at 9:12 AM, Robert Nelson <robertcnel...@gmail.com> wrote: On Tue, Jan 5, 2016 at 11:08 AM, Tim Limón <tim.li...@gmail.com> wrote: > Thanks for the help.  The 8.3 image I loaded on my A5C board has issues with > the Ethernet port.  Could you recommend a 7.9 or 7.5 (LTS) snapshot?  These > two "production release" images won't flash on my old board: What "issues" are you seeing? > BBB-eMMC-flasher-debian-7.9-console-armhf-2015-11-03-2gb.img > BBB-eMMC-flasher-debian-7.9-lxde-armhf-2015-11-03-2gb.img please attach a serial boot log (eMMC flasher logs all data over serial..) Regards, -- Robert Nelson https://rcn-ee.com/ --  --Tim 408-309-4207 www.linkedin.com/pub/timothy-limon/4/867/869 --  --Tim 408-309-4207 www.linkedin.com/pub/timothy-limon/4/867/869 --  --Tim 408-309-4207 www.linkedin.com/pub/timothy-limon/4/867/869 --  --Tim 408-309-4207 www.linkedin.com/pub/timothy-limon/4/867/869 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.