On Jan 30, 2016 1:36 PM, "Wally Bkg" <[email protected]> wrote: > > Great! I'll be among the first to download Sunday's new Jessie image! Do you know if the BoneScript PWM is now working?
Bonescript is still only written for 3.8, it needs to be ported to the 4.1 config-pin interface. > Most of my hours wasted is re-installing and re-configuring the non-standard stuff I use, so I'm not sure how bmaptool (which I assume is a "better" SD card burner) would buy me much. I start dd and do something else -- the dd is always done by the time I get back to it :) bmaptool does things like skipping writing zero's which dd has to write. For each img.xz on the file server there is a matching .bmap file. > I know apt-get upgrade shouldn't break anything, but I'd been using a Jessie testing image (I think 8.1 from about April or May 2015) on both my BBW and BBB I upgraded them both (after skipping several other image releases) before rebooting either, and neither would allow a login afterwards -- no X on the BBB and no ssh on both. I could recover my files from the SD cards so it wasn't a total loss. I posted a message about it shortly after it happened, but I think my Google Groups filters (which I find less than helpful) put it where nobody seemed to notice it. >From may 2015, there was a very big upgrade in lxqt, I tried to minimize the issue (upstream changed there c++ namespace in 0.10.0) I put out a note to this usergroup on how to upgrade with out the desktop breaking.. > I've come to the conclusion I've a hardware USB issue with my A5A BBB, it sometimes works, more often not :( Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
