Hi, I have installed Jessie 8.3 with lxqt onto the eMMC of a rev C board. I used this image:
https://rcn-ee.com/rootfs/bb.org/testing/2016-01-24/lxqt-4gb/BBB-eMMC-flasher-debian-8.3-lxqt-4gb-armhf-2016-01-24-4gb.img.xz The flashing seems to be fine but when I try to install minicom I get: root@beaglebone:~# apt-get install minicom Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package minicom root@beaglebone:~# Any ideas what the problem is? I am also trying to get all the UARTS working. I have Googled long and hard but the instructions I have found are either for an earlier version of Debian or so terse I cannot follow them, such as these: https://theunemployablekoder.wordpress.com/2015/03/28/enabling-uart1-and-uart4-on-the-beaglebone-black-and-debian-jessie/ Can anyone point me to some step by step instructions to enable all the UARTS under Jessie? Any advice appreciated. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
