On Sun, Jan 31, 2016 at 6:43 PM, <dirmwt...@gmail.com> wrote: > I'm new to the beagle bone and am having difficulty reading the output of a > thumb joystick. > > I'm running Debian Jessie 8.2 > Linux kernel 4.1.12-ti-r29 > > I've connected the thumb joystick as follows > > vcc - p9_32 > gnd - p9_34 > hor - p9_36 > ver - p9_38 > > i did not connect the pin for the switch because it is not needed. > > > All the instructions that I can find on the topic suggest that you have to > enable the analog inputs on the BBB. The instructions for doing so require > using "cape-bone-iio". I've read that cape-bone or bone-cape isn't the way > things are done on linux kernels in the "4.x" range. > > So my question is, how do I get the joystick output on my BBB running Debian > 8.2 and Kernel 4.1?
sudo sh -c "echo BB-ADC' > /sys/devices/platform/bone_capemgr/slots" Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
