linux-image-4.2.5-bone2 -> Functional william@beaglebone:~$ sudo apt-get install linux-image-4.2.5-bone2 Reading package lists... Done Building dependency tree Reading state information... Done Suggested packages: linux-firmware-image-4.2.5-bone2 The following NEW packages will be installed: linux-image-4.2.5-bone2 0 upgraded, 1 newly installed, 0 to remove and 45 not upgraded. Need to get 26.2 MB of archives. After this operation, 65.5 MB of additional disk space will be used. . . . Unpacking linux-image-4.2.5-bone2 (from .../linux-image-4.2.5-bone2_1wheezy_armhf.deb) ... Setting up linux-image-4.2.5-bone2 (1wheezy) ... update-initramfs: Generating /boot/initrd.img-4.2.5-bone2 zz-uenv_txt: Updating /boot/uEnv.txt [uname_r=4.2.5-bone2]
william@beaglebone:~$ sudo reboot william@beaglebone:~$ uname -r 4.2.5-bone2 william@beaglebone:~$ sudo sh -c "echo 'pru_enable' > /sys/devices/platform/bone_capemgr/slots" william@beaglebone:~$ dmesg | grep pru [ 56.250528] bone_capemgr bone_capemgr: part_number 'pru_enable', version 'N/A' [ 56.270616] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,pru_enable' [ 56.293224] bone_capemgr bone_capemgr: slot #4: dtbo 'pru_enable-00A0.dtbo' loaded; overlay id #1 [ 56.304965] pruss_uio 4a300000.pruss: pins are not configured from the driver william@beaglebone:~$ lsmod |grep pru uio_pruss 4244 0 uio 8146 2 uio_pruss,uio_pdrv_genirq On Thu, Feb 25, 2016 at 9:02 PM, William Hermans <[email protected]> wrote: > GIve me a few, I'll test both. > > On Thu, Feb 25, 2016 at 8:48 PM, Robert Nelson <[email protected]> > wrote: > >> >> >> On Thu, Feb 25, 2016 at 9:42 PM, William Hermans <[email protected]> >> wrote: >> >>> BY the way . . . my workflow . . . >>> >>> william@beaglebone:~$ uname -r >>> 4.1.12-bone-rt-r16 >>> william@beaglebone:~$ cat /etc/dogtag >>> BeagleBoard.org Debian Image 2015-03-01 >>> ( Wheezy 7.8 ) >>> >>> >>> william@beaglebone:~$ sudo apt-get update >>> william@beaglebone:~$ apt-cache search linux-image-4 |grep bone-rt >>> linux-image-4.0.8-bone-rt-r8 - Linux kernel, version 4.0.8-bone-rt-r8 >>> linux-image-4.1.10-bone-rt-r16 - Linux kernel, version 4.1.10-bone-rt-r16 >>> linux-image-4.1.11-bone-rt-r16 - Linux kernel, version 4.1.11-bone-rt-r16 >>> linux-image-4.1.12-bone-rt-r16 - Linux kernel, version 4.1.12-bone-rt-r16 >>> linux-image-4.1.13-bone-rt-r16 - Linux kernel, version 4.1.13-bone-rt-r16 >>> linux-image-4.1.13-bone-rt-r17 - Linux kernel, version 4.1.13-bone-rt-r17 >>> linux-image-4.1.14-bone-rt-r17 - Linux kernel, version 4.1.14-bone-rt-r17 >>> linux-image-4.1.15-bone-rt-r17 - Linux kernel, version 4.1.15-bone-rt-r17 >>> linux-image-4.1.15-bone-rt-r18 - Linux kernel, version 4.1.15-bone-rt-r18 >>> linux-image-4.1.16-bone-rt-r18 - Linux kernel, version 4.1.16-bone-rt-r18 >>> linux-image-4.1.17-bone-rt-r18 - Linux kernel, version 4.1.17-bone-rt-r18 >>> linux-image-4.1.17-bone-rt-r19 - Linux kernel, version 4.1.17-bone-rt-r19 >>> linux-image-4.1.18-bone-rt-r19 - Linux kernel, version 4.1.18-bone-rt-r19 >>> linux-image-4.1.3-bone-rt-r15 - Linux kernel, version 4.1.3-bone-rt-r15 >>> linux-image-4.1.5-bone-rt-r15 - Linux kernel, version 4.1.5-bone-rt-r15 >>> linux-image-4.1.7-bone-rt-r16 - Linux kernel, version 4.1.7-bone-rt-r16 >>> linux-image-4.1.8-bone-rt-r16 - Linux kernel, version 4.1.8-bone-rt-r16 >>> linux-image-4.1.9-bone-rt-r16 - Linux kernel, version 4.1.9-bone-rt-r16 >>> linux-image-4.4.0-bone-rt-r1 - Linux kernel, version 4.4.0-bone-rt-r1 >>> linux-image-4.4.0-bone-rt-r2 - Linux kernel, version 4.4.0-bone-rt-r2 >>> linux-image-4.4.0-bone-rt-r3 - Linux kernel, version 4.4.0-bone-rt-r3 >>> linux-image-4.4.0-rc8-bone-rt-r1 - Linux kernel, version >>> 4.4.0-rc8-bone-rt-r1 >>> linux-image-4.4.1-bone-rt-r4 - Linux kernel, version 4.4.1-bone-rt-r4 >>> linux-image-4.4.1-bone-rt-r5 - Linux kernel, version 4.4.1-bone-rt-r5 >>> linux-image-4.4.2-bone-rt-r5 - Linux kernel, version 4.4.2-bone-rt-r5 >>> >>> william@beaglebone:~$ sudo apt-get install linux-image-4.4.2-bone-rt-r5 >>> Reading package lists... Done >>> Building dependency tree >>> Reading state information... Done >>> Suggested packages: >>> linux-firmware-image-4.4.2-bone-rt-r5 >>> The following NEW packages will be installed: >>> linux-image-4.4.2-bone-rt-r5 >>> 0 upgraded, 1 newly installed, 0 to remove and 45 not upgraded. >>> Need to get 27.6 MB of archives. >>> After this operation, 70.4 MB of additional disk space will be used. >>> >>> . . . >>> >>> Unpacking linux-image-4.4.2-bone-rt-r5 (from >>> .../linux-image-4.4.2-bone-rt-r5_1wheezy_armhf.deb) ... >>> Setting up linux-image-4.4.2-bone-rt-r5 (1wheezy) ... >>> update-initramfs: Generating /boot/initrd.img-4.4.2-bone-rt-r5 >>> zz-uenv_txt: Updating /boot/uEnv.txt [uname_r=4.4.2-bone-rt-r5] >>> >>> william@beaglebone:~$ sudo reboot >>> >>> Broadcast message from root@beaglebone (pts/0) (Thu Feb 25 20:20:41 >>> 2016): >>> The system is going down for reboot NOW! >>> william@beaglebone:~$ Connection to 192.168.xxx.xxx closed by remote >>> host. >>> Connection to 192.168.xxx.xxx closed. >>> >>> william@eee-pc:~$ ssh [email protected] >>> Debian GNU/Linux 7 >>> >>> BeagleBoard.org Debian Image 2015-03-01 >>> >>> Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian >>> >>> default username:password is [debian:temppwd] >>> >>> [email protected]'s password: >>> Last login: Mon Feb 22 12:59:23 2016 from 192.168.xxx.xxx >>> >>> william@beaglebone:~$ uname -r >>> 4.4.2-bone-rt-r5 >>> >> >> >> Yeap, that looks right... Yuck, something broke.. >> >> Does it work with either of these? (last 4.3.x & last 4.2.x) >> >> linux-image-4.3.6-bone5 >> linux-image-4.2.5-bone2 >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
