I'm still seeing this: pin 82 (44e10948.0): 4a101000.mdio (GPIO UNCLAIMED) function davinci_mdio_default group davinci_mdio_default pin 83 (44e1094c.0): 4a101000.mdio (GPIO UNCLAIMED) function davinci_mdio_default group davinci_mdio_default
Are these pins required for the ethernet MAC ? And are they interfering with the McASP module ? On Wed, Apr 20, 2016 at 3:05 PM, William Hermans <[email protected]> wrote: > Ok it is still not working, I'm kind of at a dead end now. I dont know how > to proceed from here. > > william@beaglebone:~$ *sudo sh -c "echo 'BB-BONE-AUDI-02' > > /sys/devices/platform/bone_capemgr/slots"* > william@beaglebone:~$ cat /sys/devices/platform/bone_capemgr/slots > 0: PF---- -1 > 1: PF---- -1 > 2: PF---- -1 > 3: PF---- -1 > william@beaglebone:~$ *uname -r* > 4.4.7-bone-rt-r9 > william@beaglebone:~$ *cat /etc/dogtag* > BeagleBoard.org Debian Image 2015-03-01 > william@beaglebone:~$ > *dtc -v*Version: DTC 1.4.1-g1e75ebc9 > > > On Wed, Apr 20, 2016 at 2:59 PM, William Hermans <[email protected]> > wrote: > >> Robert, one more question for now if you do not mind. Is there a location >> on the web where i can view or find this information out myself, without >> having to bug you all the time ? Well I mean version status, etc. >> >> Thanks for the help, as always :) >> >> On Wed, Apr 20, 2016 at 2:51 PM, Robert Nelson <[email protected]> >> wrote: >> >>> >>> >>> On Wed, Apr 20, 2016 at 4:45 PM, William Hermans <[email protected]> >>> wrote: >>> >>>> Ok, still not working. >>>> >>>> Robert, so is there anything note worthy not working in 4.4* ? We have >>>> to know up front . . . >>>> >>> >>> It's in pretty good shape... >>> >>> am335x: >>> remoteproc_pruss (not ported) >>> >>> bbgw = wl1835 & mmc3 fighting either other... >>> >>> uio_pruss = (v4.4.x-bone) is reported to have been working.. >>> >>> x15: >>> >>> opencl: (remoteproc_<something>) not ready.. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/CAOCHtYguxbq458W85EPd%3DzGKDsJ%3D9_9tNfPn%3Db-PXBhmgrAGqw%40mail.gmail.com >>> <https://groups.google.com/d/msgid/beagleboard/CAOCHtYguxbq458W85EPd%3DzGKDsJ%3D9_9tNfPn%3Db-PXBhmgrAGqw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORoLc2z5ixz_p%3DcGutOt%2BeWwgHBQUqe_oYbFge3uJ9UJZQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
