Is the audio cape another one of those eeprom capes that need physical hardware in order to load properly ? Because I do not have the physical cape.
On Wed, Apr 20, 2016 at 3:10 PM, William Hermans <[email protected]> wrote: > I'm still seeing this: > > pin 82 (44e10948.0): 4a101000.mdio (GPIO UNCLAIMED) function > davinci_mdio_default group davinci_mdio_default > pin 83 (44e1094c.0): 4a101000.mdio (GPIO UNCLAIMED) function > davinci_mdio_default group davinci_mdio_default > > Are these pins required for the ethernet MAC ? And are they interfering > with the McASP module ? > > On Wed, Apr 20, 2016 at 3:05 PM, William Hermans <[email protected]> > wrote: > >> Ok it is still not working, I'm kind of at a dead end now. I dont know >> how to proceed from here. >> >> william@beaglebone:~$ *sudo sh -c "echo 'BB-BONE-AUDI-02' > >> /sys/devices/platform/bone_capemgr/slots"* >> william@beaglebone:~$ cat /sys/devices/platform/bone_capemgr/slots >> 0: PF---- -1 >> 1: PF---- -1 >> 2: PF---- -1 >> 3: PF---- -1 >> william@beaglebone:~$ *uname -r* >> 4.4.7-bone-rt-r9 >> william@beaglebone:~$ *cat /etc/dogtag* >> BeagleBoard.org Debian Image 2015-03-01 >> william@beaglebone:~$ >> *dtc -v*Version: DTC 1.4.1-g1e75ebc9 >> >> >> On Wed, Apr 20, 2016 at 2:59 PM, William Hermans <[email protected]> >> wrote: >> >>> Robert, one more question for now if you do not mind. Is there a >>> location on the web where i can view or find this information out myself, >>> without having to bug you all the time ? Well I mean version status, etc. >>> >>> Thanks for the help, as always :) >>> >>> On Wed, Apr 20, 2016 at 2:51 PM, Robert Nelson <[email protected]> >>> wrote: >>> >>>> >>>> >>>> On Wed, Apr 20, 2016 at 4:45 PM, William Hermans <[email protected]> >>>> wrote: >>>> >>>>> Ok, still not working. >>>>> >>>>> Robert, so is there anything note worthy not working in 4.4* ? We have >>>>> to know up front . . . >>>>> >>>> >>>> It's in pretty good shape... >>>> >>>> am335x: >>>> remoteproc_pruss (not ported) >>>> >>>> bbgw = wl1835 & mmc3 fighting either other... >>>> >>>> uio_pruss = (v4.4.x-bone) is reported to have been working.. >>>> >>>> x15: >>>> >>>> opencl: (remoteproc_<something>) not ready.. >>>> >>>> Regards, >>>> >>>> -- >>>> Robert Nelson >>>> https://rcn-ee.com/ >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/CAOCHtYguxbq458W85EPd%3DzGKDsJ%3D9_9tNfPn%3Db-PXBhmgrAGqw%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/beagleboard/CAOCHtYguxbq458W85EPd%3DzGKDsJ%3D9_9tNfPn%3Db-PXBhmgrAGqw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORo5T464-eO4%2B5KjKQ8pJWComD-tSfR02utGtgD%3D%2BbBQbg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
