What image do I need to be using, in order to use the uart3_txd? I am currently using Debian, version 3.8.13-bone79.
On Thursday, May 12, 2016 at 8:26:59 AM UTC-4, Wally Bkg wrote: > > Assuming he's using one of the newer images, > Any reason it can't be done with config-pin instead of an overlay? > > > On Wednesday, May 11, 2016 at 1:55:08 PM UTC-5, RobertCNelson wrote: >> >> >> >> On Wed, May 11, 2016 at 1:48 PM, Michael Williams <[email protected]> >> wrote: >> >>> Thank you, Robert, for the tips and files. Still not having luck with >>> enabling the uart3_txd. With the github file, linked above, does that have >>> to be put in a special place and does it need compiled? Also, can the >>> other uarts be enabled along with the uart3_txd? Normally, I include this >>> "cape_enable=capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART4,BB-UART5" in >>> my uEnv.txt file so I can enable those uarts. I have tried issuing adding >>> the line you sent me, "cape_enable=bone_capemgr.enable_partno=BB-UART3", >>> both with and without my normal line and still not seeing the >>> uart3_txd(ttyO3) listed in device list. >>> >> >> >> >> cape_enable=capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART3,BB-UART4,BB-UART5 >> >> >> Regards, >> >> >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c6f4633c-b74f-45cb-b401-9631bc0f18d2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
