I apologize for bothering you again. I seem to be having a problem compiling the BB-UART3-00A0.dts file that you sent me a link to. Here is the command I issue to compile it. "dtc -O dtb -o BB-UART3-00A0.dtbo -b 0 -@ BB-UART3-00A0.dts" I have tried several times and have received the following error
"Error: BB-UART3-00A0.dts:11.1-9 syntax error FATAL ERROR: Unable to parse input tree" is there a trick or something special I need to do to compile it to get it to compile correctly? Thanks again, Mike On Wednesday, May 11, 2016 at 2:55:08 PM UTC-4, RobertCNelson wrote: > > > > On Wed, May 11, 2016 at 1:48 PM, Michael Williams <[email protected] > <javascript:>> wrote: > >> Thank you, Robert, for the tips and files. Still not having luck with >> enabling the uart3_txd. With the github file, linked above, does that have >> to be put in a special place and does it need compiled? Also, can the >> other uarts be enabled along with the uart3_txd? Normally, I include this >> "cape_enable=capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART4,BB-UART5" in >> my uEnv.txt file so I can enable those uarts. I have tried issuing adding >> the line you sent me, "cape_enable=bone_capemgr.enable_partno=BB-UART3", >> both with and without my normal line and still not seeing the >> uart3_txd(ttyO3) listed in device list. >> > > > > cape_enable=capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART3,BB-UART4,BB-UART5 > > > Regards, > > > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b41268c5-1ddb-48a8-8d10-aaf4dc87cd24%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
