Thanks for the tip! Anyone look at migrating these into the http://github.com/beagleboard/am335x_pru_package repo/package?
On Tue, Jun 14, 2016 at 7:13 AM Greg <[email protected]> wrote: > I've been experimenting with the PRU support package, and noted this > significant change to the RPMsg examples published by TI: > > https://git.ti.com/pru-software-support-package > > Commit message from May 20: > > Convert RPMsg examples from mailboxes to interrupts > <https://git.ti.com/pru-software-support-package/pru-software-support-package/commit/69805828df0f262fb60363c2db189d1b8d0b693c> > > This commit moves the rpmsg library and examples away from using the > SOC mailboxes. Master interrupt events in the PRU-ICSS interrupt > controller are now being used for the signaling between the PRUs and > the ARM core(s). > <https://git.ti.com/pru-software-support-package/pru-software-support-package/commit/69805828df0f262fb60363c2db189d1b8d0b693c> > > PRU-ICSS System Events 16 and 17 are being used for PRU0 in all > subsystems and System Events 18 and 19 are being used for PRU1. > <https://git.ti.com/pru-software-support-package/pru-software-support-package/commit/69805828df0f262fb60363c2db189d1b8d0b693c> > > This change is necessary because existing devices may not have enough > mailboxes to support each PRU core (AM437x) and future devices (k2g) > based on the KeyStone architecture do not have mailboxes at all. > <https://git.ti.com/pru-software-support-package/pru-software-support-package/commit/69805828df0f262fb60363c2db189d1b8d0b693c> > > This change simplifies the PRU_RPMsg_Echo_Interrupt examples to the > point that the PRU_RPMsg_Echo_Polling examples are no longer > necessary so they have been removed. > <https://git.ti.com/pru-software-support-package/pru-software-support-package/commit/69805828df0f262fb60363c2db189d1b8d0b693c> > > > The nested while loops in the RPMsg examples have been simplified. > > This makes them a bit easier to understand. > > > Regards, > > Greg > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/47782632-79dc-4bd2-8525-e5ce8c1f0cdc%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/47782632-79dc-4bd2-8525-e5ce8c1f0cdc%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2BT6QP%3DTzuYgOc-LOS9CJvrhRkE-V2MbR0m8wqvQ-thzFszOhQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
