Just a heads up: The newest revision of the BeagleBone Green uses a newer spec of the eMMC.
For most kernel's this is a seamless hardware upgrade. Except for our ancient 3.8.13 based kernel. So I've pushed out a new release, and tested it on 1 new bbg board: => mmc info Device: OMAP SD/MMC Manufacturer ID: 13 OEM: 14e Name: Q2J54 Tran Speed: 52000000 Rd Block Len: 512 MMC version 5.0 High Capacity: Yes Capacity: 3.6 GiB Bus Width: 4-bit Erase Group Size: 512 KiB HC WP Group Size: 8 MiB User Capacity: 3.6 GiB WRREL Boot Capacity: 2 MiB ENH RPMB Capacity: 512 KiB ENH [ 0.862806] mmc1: BKOPS_EN bit is not set [ 0.869942] mmc1: new high speed MMC card at address 0001 [ 0.873175] mmcblk0: mmc1:0001 Q2J54A 3.64 GiB [ 0.874295] mmcblk0boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB [ 0.874594] mmcblk0boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB [ 0.876017] mmcblk0: p1 [ 0.878978] mmcblk0boot1: unknown partition table [ 0.881766] mmcblk0boot0: unknown partition table Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgpN2m9Z_9uA5Nyk%3Dm39fcCB%2BCLb%3DzYd7Be9Rk0eC%2B%3D6w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
