On Wed, Jun 15, 2016 at 10:45 AM, Robert Nelson <[email protected]> wrote: > Just a heads up: > > The newest revision of the BeagleBone Green uses a newer spec of the eMMC. > > For most kernel's this is a seamless hardware upgrade. > > Except for our ancient 3.8.13 based kernel. > > So I've pushed out a new release, and tested it on 1 new bbg board: > > => mmc info > Device: OMAP SD/MMC > Manufacturer ID: 13 > OEM: 14e > Name: Q2J54 > Tran Speed: 52000000 > Rd Block Len: 512 > MMC version 5.0 > High Capacity: Yes > Capacity: 3.6 GiB > Bus Width: 4-bit > Erase Group Size: 512 KiB > HC WP Group Size: 8 MiB > User Capacity: 3.6 GiB WRREL > Boot Capacity: 2 MiB ENH > RPMB Capacity: 512 KiB ENH > > > [ 0.862806] mmc1: BKOPS_EN bit is not set > [ 0.869942] mmc1: new high speed MMC card at address 0001 > [ 0.873175] mmcblk0: mmc1:0001 Q2J54A 3.64 GiB > [ 0.874295] mmcblk0boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB > [ 0.874594] mmcblk0boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB > [ 0.876017] mmcblk0: p1 > [ 0.878978] mmcblk0boot1: unknown partition table > [ 0.881766] mmcblk0boot0: unknown partition table
and here's the wheezy image with the 3.8.13-bone80 kernel with support for the newer bbg eMMC: https://rcn-ee.net/rootfs/bb.org/release/2016-06-15/ Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYj9bDzqgi_cTfKO1iZ%3DXREf_pwbeo_4chG%2Bz5WCTaDKmQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
