Hi Pedro, On Wed, Jul 13, 2016 at 10:30 PM, <[email protected]> wrote:
> Hi, > > I am trying to create a 802.11 Mesh Network using BBG-W. It seems to me > that it should be possible as TI has advertised that their WiLink 8 modules > are capable of this type of network. > > I first tried to use "sudo iw phy phy0 interface add mesh0 type mp mesh_id > mymesh", but it returns "Operation not supported (-95)". Then, I noticed > that "iw list" says only: > " Supported interface modes: > * managed > * AP > * AP/VLAN > * monitor > * P2P-client > * P2P-GO > * P2P-device" > So no mesh... > > I am using "BBGW-blank-debian-8.5-seeed-iot-armhf-2016-07-10-4gb.img.xz > <https://rcn-ee.net/rootfs/bb.org/testing/2016-07-10/seeed-iot/BBGW-blank-debian-8.5-seeed-iot-armhf-2016-07-10-4gb.img.xz>" > image. > > I hope this is a driver related problem, is that it? > > If so, how should I proceed? Follow > http://processors.wiki.ti.com/index.php/WiLink8_Linux_Getting_Started_Guide > to create a compatible image? > last i had heard from ti, mesh was still to be coming in our v4.4.x-ti branch.. it also might be something we are still missing from hostapd/wpa_supplicant, we bumped debian 8.x's hostapd up to 2.5 from 2.3 and connman to 1.31.. to better support the wl18xx out of the box. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhjHHLpM58Xs6wGmW9UzSKHD%3D2NAB-SCv6Vytj7SW82MA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
