mesh networks use a 802.11.15.4 link layer
From: "[email protected]" <[email protected]>
To: BeagleBoard <[email protected]>
Sent: Wednesday, July 13, 2016 5:30 PM
Subject: [beagleboard] 802.11 Mesh Network with WiLink 8
Hi,
I am trying to create a 802.11 Mesh Network using BBG-W. It seems to me that it
should be possible as TI has advertised that their WiLink 8 modules are capable
of this type of network.
I first tried to use "sudo iw phy phy0 interface add mesh0 type mp mesh_id
mymesh", but it returns "Operation not supported (-95)". Then, I noticed that
"iw list" says only:" Supported interface modes: * managed * AP * AP/VLAN *
monitor * P2P-client * P2P-GO * P2P-device"So no mesh...
I am using "BBGW-blank-debian-8.5-seeed-iot-armhf-2016-07-10-4gb.img.xz" image.
I hope this is a driver related problem, is that it?
If so, how should I proceed? Follow
http://processors.wiki.ti.com/index.php/WiLink8_Linux_Getting_Started_Guide to
create a compatible image?
Best,Pedro
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/97cd0755-b505-4da4-bdd5-a193849324a6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/1678669680.2913949.1468457345379.JavaMail.yahoo%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.
