When I first plug power into my BBGW, everything works great. But if I issue a "reboot" or "shutdown -r now" command, when the device boots back up I have no wifi.
*Anyone else having problems with wifi not working when doing a "warm" reboot? Is this a known problem, or is there a known workaround?* I've diff'd the output of the serial console when it works and when it doesn't, and I only see 1 line difference at the very start of the boot process. When it works: DRAM: 512 MiB Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 When it doesn't work: DRAM: 512 MiB Reset Source: Global warm SW reset has occurred. Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 When it doesn't work, I get this message logged in dmesg every few seconds after the boot has finished: [ 612.676285] wlcore: ERROR firmware boot failed despite 3 retries [ 620.458410] wlcore: ERROR timeout waiting for the hardware to complete initialization [ 622.558761] wlcore: ERROR timeout waiting for the hardware to complete initialization [ 624.634344] wlcore: ERROR timeout waiting for the hardware to complete initialization The only other thing I've noticed is a 20-line error message and backtrace logged to /var/log/messages. That start of which looks like this: May 21 15:34:57 beaglebone kernel: [ 31.978453] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) May 21 15:34:57 beaglebone kernel: [ 32.067899] wlcore: loaded May 21 15:34:57 beaglebone kernel: [ 32.454957] wlcore: PHY firmware version: Rev 8.2.0.0.236 May 21 15:34:57 beaglebone kernel: [ 32.494528] wlcore: firmware booted (Rev 8.9.0.0.69) May 21 15:34:57 beaglebone kernel: [ 32.511704] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready May 21 15:34:57 beaglebone kernel: [ 32.857933] ------------[ cut here ]------------ May 21 15:34:57 beaglebone kernel: [ 32.858199] WARNING: CPU: 0 PID: 1781 at drivers/net/wireless/ti/wlcore/main.c:797 wl12xx_queue_recovery_work.part.8+0x46/0x48 [wlcore]() May 21 15:34:57 beaglebone kernel: [ 32.858207] Modules linked in: arc4 wl18xx wlcore mac80211 snd_soc_evm snd_soc_wilink8_bt omap_aes_driver omap_sham omap_rng rng_core snd_soc_davinci_mcasp snd_soc_edma snd_soc_omap wlcore_sdio snd_soc_core snd_pcm_dmaengine snd_pcm snd_timer snd soundcore evdev uio_pdrv_genirq uio usb_f_acm u_serial usb_f_rndis g_multi usb_f_mass_storage u_ether libcomposite cfg80211 rfkill May 21 15:34:57 beaglebone kernel: [ 32.858314] CPU: 0 PID: 1781 Comm: irq/54-wl18xx Not tainted 4.4.19-ti-r41 #1 May 21 15:34:57 beaglebone kernel: [ 32.858321] Hardware name: Generic AM33XX (Flattened Device Tree) I'm using this build: https://rcn-ee.com/rootfs/bb.org/testing/2016-09-04/seeed-iot/BBGW-blank-debian-8.5-seeed-iot-armhf-2016-09-04-4gb.img.xz TIA. Stéphane -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/09cb8c5b-da27-44a3-827f-633310143188%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
