you are not making sense.

pwm pin low - 0v high = 3.3 v



On 9/20/2016 1:48 AM, Hồng Quân Nguyễn wrote:
> Hi,
>
> Is there any way to configure logic level for PWM on BeagleBone
> Black/Green? I want that in duty cycle, the level of pinout is 0V,
> instead of 3.3V.
>
> I'm using Debian 8 with kernel 4.1.
> -- 
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google
> Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to beagleboard+unsubscr...@googlegroups.com
> <mailto:beagleboard+unsubscr...@googlegroups.com>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/b7a08f19-4ea3-4f17-bd60-1909f49de24d%40googlegroups.com
> <https://groups.google.com/d/msgid/beagleboard/b7a08f19-4ea3-4f17-bd60-1909f49de24d%40googlegroups.com?utm_medium=email&utm_source=footer>.
> For more options, visit https://groups.google.com/d/optout.


-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/736d8caa-ea66-d658-6e52-f8fa1c8c592a%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to