Hi Robert, Thanks for that update.
We're still modifying hardware on about 10 boards/month to get around the phy reset issue, so a kernel patch for the same result is very well received. Regards, Andrew Glen. On 12 October 2016 at 08:42, Robert Nelson <[email protected]> wrote: > On Tue, Oct 11, 2016 at 2:32 PM, Kevin Fructuoso > <[email protected]> wrote: > > Hi Robert, > > > > Thank you for the quick reply! We are using kernel 3.8.13-bone47 on rev C > > Beaglebones. > > So this was first fixed in bone60, here's the kernel patch you'll need > to apply and rebuild 3.8.13-bone47 > > https://github.com/RobertCNelson/bb-kernel/blob/ > 607ae2e36477357a4bb222f285fd7460d5230ab9/patches/net/0009- > cpsw-search-for-phy.patch > > > You mention later boards have a dedicated GPIO pin for this. Is > > that not the case for the rev C? > > If we ever get a rev D, i wish this fix would be included. ;) > > So, only later "newly" designed boards have it.. > > > I was hoping to maybe check dmesg | grep "..." for this specific error > and > > then start a reboot of the beaglebone if I detect it. > > > > "So the workaround that we use in later kernel versions, we just the > > mdio/phy address we find, vs the one that's wired up.." > > > > I'm sorry but I'm not quite an expert on this topic. What do you mean > > exactly? > > > > Thanks in advance for your reply! > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/beagleboard/9mctrG26Mc8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/CAOCHtYjK8TRALxi6EHjYwJ18GkVG- > HpJXPEwyt5EOeLpo_69dA%40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHKgOt6SShXsDHhAXb2q3GL34nOaCjo4zFcsKhSF5GOX%2ByVaqQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
