> On Oct 19, 2016, at 7:55 PM, Alvin Koontz <[email protected]> wrote: > > Hi, I am one of the students who was given the BBBlue to interface with the > robot, We have the latest image on an SD card in the BBBlue, on boot the leds > appear to go through the normal boot routine. However we are unable to > interface with it in anyway.
I shipped it with a working image on the eMMC. Is that still intact? > Initially we tried to connect with the usb network cable, however it was not > recognized as even being attached by Ubuntu or windows, where as the black > normally will show up as a device. So we tried to interface with UART0 which > we assume is the debug serial port, and the only thing we read was nonsense, > using the same serial config that we use to interface with the black. Did you use proper grounding? Did you configure as 115200 baud N81? I've been using the serial port without issue. > So we are unsure if we are missing something or if there is maybe a problem > with the board I'm guessing you are missing something. Can you try to more clearly document what you tried? > >> On Friday, October 14, 2016 at 2:58:28 PM UTC-4, RobertCNelson wrote: >> On Fri, Oct 14, 2016 at 1:41 PM, Mark A. Yoder <[email protected]> wrote: >> > I've just handed off my BBBlue to a student team to interface it to >> > SparkFun >> > robot[1]. >> > >> > Where should I point them to get current information on the Blue? For >> > example, what image should they be running? >> >> Start with Last sunday's iot image.. (this sunday's will be better).. >> >> then follow: >> >> https://github.com/StrawsonDesign/Robotics_Cape_Installer >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/74094b8c-4f74-4a8c-a025-f3ead45219ad%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0BCC084C-A8DF-4B2E-B61E-A5E373EF1F3A%40gmail.com. For more options, visit https://groups.google.com/d/optout.
