1) The first tutorial blinking the four onboard leds. I did the tutorial using bonescript and also by using echo > at the prompt to change the corresponding files ( /sys/class/leds/beaglebone\:green\:usrx) ISSUE FOUND: One thing I wrestled with was the leds by default do not follow the predescribed operational pattern. Echoing "none" to the trigger files and other changes to the bonescript did not have any affect. The leds would continue to alternate 1,3 lit then 2,4 lit. It was obvious that something else was writing to the leds and was interfering with the tutorials.
SOLUTION: I found that if I connected to the BBGw with my phone and clicked "done" every time the BBGw is turned on or reset, the leds would then go back to their stated mode of operation. and allow the tutorials to work properly. End entry 1. On Sunday, November 13, 2016 at 4:09:06 PM UTC-6, Chris M wrote: > > Some thoughts and findings as I begin to learn the BBG (Beaglebone Green) > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4117e9ff-4810-47c0-a22d-d8280544499a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
