On Nov 13, 2016 4:25 PM, "Chris M" <[email protected]> wrote: > > 1) The first tutorial blinking the four onboard leds. > > I did the tutorial using bonescript and also by using echo > at the prompt to change the corresponding files ( /sys/class/leds/beaglebone\:green\:usrx) > > ISSUE FOUND: > One thing I wrestled with was the leds by default do not follow the predescribed operational pattern. Echoing "none" to the trigger files and other changes to the bonescript did not have any affect. > The leds would continue to alternate 1,3 lit then 2,4 lit. It was obvious that something else was writing to the leds and was interfering with the tutorials.
On the BBGW, this is the signal that wifi isn't connected to an AP. This was a choice made by Seeed for their out of box experience. Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjRgx9QmogAH9vRpWGLyWvmj6w5OyaCra29oPOPF-pfPw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
