7)Setting up a link sprite LS-Y201 camera I bought. It took some time to get the UART pins to work on the BBG.
ISSUE FOUND: The UART pins are not enabled by default as UART pins. I tried several methods, and ended up following the instructions posted here (http://tinkernow.com/2015/01/beaglebone-black-rs232-uart-setup/) to set up and test the pins. SOLUTION: Changing adding the pins to the /boot/uEnv.txt file allowed the minicom test to work. You cannot install minicom with apt get / dpkg until you update the package library (apt-get update) at the root dir end entry 7 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/72d91c42-1362-4b18-852d-080c3c9c5efd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
