Hello -- When looking at the dump of a BBBlackRevC eeprom, I can see the header, board,version, and serial. However, as the eeprom on newly received BBBWireless was mis-programmed, some of this information is lacking. The Black's label on P8 gives the 12-byte serial, but the Wireless gives, what I may naively be assuming, is a 16-byte serial number.
I am curious if the serializing conventions have changed for the Wireless boards, departing from that described in Table 7 of the SRM. Anyway, if any new owners of a BeagleBone Black Wireless board could post their eeprom contents here, I will be much appreciative. Mine was purchased from Mouser last week right from the get-go of their being available there. method: root@beaglebone:/sys/bus/i2c/devices/0-0050# cat eeprom | hexdump -C (contents will appear here) Thank you very much, Mark -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8462ce36-6ce5-4a50-8261-2fa12e254544%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
