> On Dec 13, 2016, at 5:14 PM, Mark <[email protected]> wrote: > > > Hello -- > > When looking at the dump of a BBBlackRevC eeprom, I can see the header, > board,version, and serial. However, as the eeprom on newly received > BBBWireless was mis-programmed, some of this information is lacking. The > Black's label on P8 gives the 12-byte serial, but the Wireless gives, what I > may naively be assuming, is a 16-byte serial number.
The first 4 are the board revision. The last 12 are the serial number, same as before. > > I am curious if the serializing conventions have changed for the Wireless > boards, departing from that described in Table 7 of the SRM. > > Anyway, if any new owners of a BeagleBone Black Wireless board could post > their eeprom contents here, I will be much appreciative. Mine was purchased > from Mouser last week right from the get-go of their being available there. > > method: > root@beaglebone:/sys/bus/i2c/devices/0-0050# cat eeprom | hexdump -C > > (contents will appear here) > > Thank you very much, > Mark > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/8462ce36-6ce5-4a50-8261-2fa12e254544%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0CBCD826-A9D3-421A-9FDC-C826F44A3048%40gmail.com. For more options, visit https://groups.google.com/d/optout.
