I flashed the new image and the board started to work correctly, both mass device and Ethernet over USB. However, after disabling HDMI and eMMc as you suggested, none of these two shows up, as if the board weren't connected at all.
Is it that "disable eMMC" disables eMMC completely, so that not it does not work as a boot partition? Should I thus always boot from the card if I want to use the cape? Yes, the card keeps reflashing eMMC. rootfs mounts readonly to PC sot that I can not disable the reflashing. What should I do? On Saturday, December 24, 2016 at 2:03:25 AM UTC+1, RobertCNelson wrote: > > On Fri, Dec 23, 2016 at 5:33 PM, <[email protected] <javascript:>> wrote: > > Thanks Robert for fixing this. However, I use this lcd cape: > > > > > http://pl.farnell.com/element14/bb-cape-disp-ct43/display-board-tft-lcd-beaglebone/dp/2526164 > > > > > for which I need "temporarily" a custom image: > > https://www.element14.com/community/docs/DOC-81966 > > > > "The intention is to provision and release an official beagleboard.org > > supported firmware image that will be posted > > to beagleboard.org’s firmware images page" > > > > which also does not bring usb0. > > > > I wonder if the image which you linked might already support the cape? I > > think that I will just flash that image and not use > > the lcd for now. > > Oh that lcd/board combination is supported, with a couple small tweaks.. > > Grab the lxqt-4gb image, and boot.. > > Login and change: > > /boot/uEnv.txt > > dtb=am335x-boneblack-overlay.dtb > > and also run: > > sudo apt update ; sudo apt upgrade > > as another user just solved the lightdm startup issue today, so that > was just pushed to the repo.. > > (this sunday's snapshot will have that package updated by default) > > and we are a few weeks away from making that cape work out of the box > (all lcd3/lcd4/lcd7 capes) > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/b56203b9-c8f5-4e26-9442-c5de442ad9e2%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
