"Yet, the card...." On Saturday, December 24, 2016 at 2:49:40 PM UTC+1, [email protected] wrote: > > I flashed the new image and the board started to work correctly, both mass > device and Ethernet over USB. However, after disabling HDMI and eMMc as you > suggested, none of these two shows up, as if the board weren't connected at > all. > > Is it that "disable eMMC" disables eMMC completely, so that not it does > not work as a boot partition? Should I thus always boot from the card if I > want to use the cape? Yes, the card keeps reflashing eMMC. rootfs mounts > readonly to PC sot > that I can not disable the reflashing. What should I do? > > On Saturday, December 24, 2016 at 2:03:25 AM UTC+1, RobertCNelson wrote: >> >> On Fri, Dec 23, 2016 at 5:33 PM, <[email protected]> wrote: >> > Thanks Robert for fixing this. However, I use this lcd cape: >> > >> > >> http://pl.farnell.com/element14/bb-cape-disp-ct43/display-board-tft-lcd-beaglebone/dp/2526164 >> >> > >> > for which I need "temporarily" a custom image: >> > https://www.element14.com/community/docs/DOC-81966 >> > >> > "The intention is to provision and release an official beagleboard.org >> > supported firmware image that will be posted >> > to beagleboard.org’s firmware images page" >> > >> > which also does not bring usb0. >> > >> > I wonder if the image which you linked might already support the cape? >> I >> > think that I will just flash that image and not use >> > the lcd for now. >> >> Oh that lcd/board combination is supported, with a couple small tweaks.. >> >> Grab the lxqt-4gb image, and boot.. >> >> Login and change: >> >> /boot/uEnv.txt >> >> dtb=am335x-boneblack-overlay.dtb >> >> and also run: >> >> sudo apt update ; sudo apt upgrade >> >> as another user just solved the lightdm startup issue today, so that >> was just pushed to the repo.. >> >> (this sunday's snapshot will have that package updated by default) >> >> and we are a few weeks away from making that cape work out of the box >> (all lcd3/lcd4/lcd7 capes) >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7848e97a-10f0-475a-876f-fbfe5b930552%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
