Hi Greg, root@beaglebone:~# rmmod pru_rproc rmmod: ERROR: Module pru_rproc is in use
or root@beaglebone:~# modprobe -r pru_rproc modprobe: FATAL: Module pru_rproc is in use. I am using kernel 4.4.9-ti-r25 Debian 8.6 I did not flash a new image - this is straight out of the box. Do you know what the mechanism is that blocks the module remove in the OS? Neil On Thursday, January 12, 2017 at 7:32:20 AM UTC-7, Greg wrote: > > I've never seen the FATAL error. > > The following should work: > > rmmod pru_rproc > modprobe pru_rproc > > The above commands remove the remote proc kernel module, and then > reinserts it. > Your revised firmware should be loaded after executing the modprobe > command. > > You will need root access or sudo prefix to the above commands. > What distribution are you using? > > Regards, > Greg > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6f48ea4d-aed9-4b6a-b9a2-0a1bdef13649%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
