My BBB was running debian jessie and i could access it over USB and Ethernet. Then, after one power off/power on it stopped booting from eMMC. To be exact I stoped been able too access it over both USB and Ethernet. I can still boot the board from SD and access the bard. eMMC boot though seems never finishes. I can see leds blinking in a normal boot sequence and then they end up with one led blinking for ever. If i boot from SD i can access eMMC file system (rootfs) and my /etc/network/interface on eMMC looks normal. I do not know of any other way to read a boot log on eMMC or anything to help me to understand the issue. Of course i could re-flash eMMC but then i will never know what happen :( Any help/ideas are greatly appreciated. Thanks!
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/062d34cc-7c92-44e3-a609-b27c9cf991a0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
