If you want a board that can be unplugged with no damage better look elsewhere. Or do what i have done and design around that limitation.
On 2/8/2017 12:22 PM, Roman Prilutsky wrote: > No. I am developing some software to run as a part of an automation > project, so expect the board to be tolerant to the power loss. So i > just pulled the pug out - no shutdown -h. > What could break and what is a way to diagnose it? > > > > > > On Wednesday, February 8, 2017 at 7:34:08 AM UTC-5, Roman Prilutsky > wrote: > > My BBB was running debian jessie and i could access it over USB > and Ethernet. Then, after one power off/power on it stopped > booting from eMMC. To be exact I stoped been able too access it > over both USB and Ethernet. I can still boot the board from SD > and access the bard. eMMC boot though seems never finishes. I can > see leds blinking in a normal boot sequence and then they end up > with one led blinking for ever. > If i boot from SD i can access eMMC file system (rootfs) and my > /etc/network/interface on eMMC looks normal. I do not know of any > other way to read a boot log on eMMC or anything to help me to > understand the issue. > Of course i could re-flash eMMC but then i will never know what > happen :( Any help/ideas are greatly appreciated. Thanks! > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/c1e88630-ebf7-427b-8943-564bd650bbf9%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/c1e88630-ebf7-427b-8943-564bd650bbf9%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e4ae5261-5fff-8906-57f1-708939c351b8%40gmail.com. For more options, visit https://groups.google.com/d/optout.
