On Wed, Feb 8, 2017 at 2:33 PM, acheesehead <[email protected]> wrote: > Boots ok on Beagleboard xM, but hangs on our custom board. > > U-Boot SPL 2017.03-rc1-dirty (Feb 04 2017 - 12:10:18) > Trying to boot from MMC1 > SPL: Please implement spl_start_uboot() for your board > SPL: Direct Linux boot not active! > reading u-boot.img > reading u-boot.img > > > U-Boot 2017.03-rc1-dirty (Feb 04 2017 - 12:10:18 -0700) > > OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-200MHz, Max CPU Clock 1 GHz > OMAP3 Beagle board + LPDDR/NAND
> Beagle Rev Ax/Bx > loading /boot/dtbs/4.9.7-armv7-rt-x4/omap3-beagle.dtb ... Why is your board going down the Beagle classic route? Take a look at the gpio's used for id on the xM C, you messed those up when you built your custom board.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhBOBZ8Rk4ZH%2Bj3NPwQLuqvZTCy3JvzyLJTk90GiQx25w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
