Status report: just got my other motors in and waiting on Mouser to get me my parts (probably tomorrow) so I can throw the batts together and see if the motors will take the juice (its at like 7 volts so I think I should be good). Maybe throw together that ESC I've been running my mouth about on breadboard.
Knowing me I'll get it done in the next few days and then update the schematic and maybe even the PCB traces. I'll keep you dudes in the loop either way. :D Just remember that DAEMON1 doesn't quite work yet so you might try debugging it your self...either way its a good read. On Monday, January 30, 2017 at 6:19:30 PM UTC-7, woody stanford wrote: > > I posted the remote control for this in Software, but I put a bunch of > hardware in it so I thought I'd post it here. > > > https://groups.google.com/forum/#!category-topic/beagleboard/software/evSIUcuWfUY > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/16f3bc58-6eb1-4d1a-b2b2-e0ca37805304%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
