On Tue, Mar 7, 2017 at 6:11 PM, <[email protected]> wrote: > Hello everyone, sorry if my question has been already answered - I have been > looking around for a while and haven't found a good answer. > > I am interested in adding some hardware to the Beaglebone Green Wireless > board, but in order to do that I need to change some of the device tree/pin > mux settings. I would like to eventually build a .img file with all of the > beaglebone functionality including my additional hardware for easy SD card > loading (as the currently provided images are capable of). > > I have never built a Linux image myself, and though this page ( > https://eewiki.net/display/linuxonarm/BeagleBone+Black ) is helpful, the > formatting makes it confusing which commands correspond to which processes.
Just follow it in order, top to bottom... > > My understanding is that images can be built using seeed studio's > image-builder branch: > https://github.com/beagleboard/image-builder/tree/smaller-iot > > I don't want to use overlays due to some low level interfaces moving (UARTx > -> LAN, UARTy -> CAN, LDC ->UARTz etc) dtb-rebuilder: edit the bbgw dts and add ^ those.. https://github.com/RobertCNelson/dtb-rebuilder > > Long story short: How can I build my own beaglebone green wireless image > with a custom device tree? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYg9g8uo08ONfbW3tJMEhQUAJmRhjk3ir35jAoO8LosEWA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
