Hi? Sergey! What was the issue with your DTS file? I'v the same problem. Same as you I reworked the DTS file. It was BB-I2C1-00A0.dts in my case. I'v been trying to loading my i2c-device at boot, but " bone_capemgr.enable_partno=MY-I2C1" in "/boot/uEnv.txt" doesn't work. Although it works perfectly when I echo to cape slot. I'v no idea, what is wrong.
среда, 11 мая 2016 г., 20:44:08 UTC+3 пользователь Sergey Manucharian написал: > > SOLVED: it works now: > > bone_capemgr.enable_partno=BB-LCD10 > > It was my fault. I reworked the DTS file. Initially it was based on the > old BB-BONE-LCD7-01-00A0.dts (since my cape has been designed based on Bone > LCD 7"). > But even BB-BONE-LCD7-01-00A1.dts works out of the box for my LCD panel. > Although the hardware engineer who designed it still works on it and makes > improvements. > > Thanks, Robert! Without your proof that it must work I wouldn't think it's > a DTS issue. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d19245d4-984c-4d56-a7a9-7467d71a3cc8%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
