Hi, I'm having trouble getting my BBB to run PRU Cape demos.
This is what I did: 0) cd /opt/source/dtb-4.4-ti && git pull 1) Add #include "am335x-boneblack-prucape.dtsi" to am335x-boneblack-wireless.dts 2) make clean && make && sudo make install This should put my device blob in /boot/dtbs/4.4.30-ti-r64, which it does 3) cd /opt/source/pru-software-support-package/ && git pull 4) cd /opt/source/pru-software-support-package/pru_cape/bin/Linux 5) sudo ./pru_demo.sh 6) Select LEDs I get an error: ./pru_demo.sh: line 67: echo: write error: No such device ./pru_demo.sh: line 68: echo: write error: No such device Those lines: 67 echo 4a334000.pru0 > /sys/bus/platform/drivers/pru-rproc/bind 68 echo 4a338000.pru1 > /sys/bus/platform/drivers/pru-rproc/bind What should I do here to get these demos to work? Where does the 4a334000.pru0 come from? How can I find my PRU IDs? Thanks, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/76f9028d-c7d2-418e-9b42-67e9567aaf4b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
