Hello, So I am using the Beaglebone Black to run a LVDS display. Specs are:
Model- G104XL-L03 Pixel Number (Resolution)- 1024x768 Size- 10.4' Interface- LVDS 18 or 24 Bit I am using a SN75LVDS83B to convert the parallel data (if that is relevant). At first I could not get the display to show anything even though BBB was running and the LVDS lines seemed to be active. Finally I plugged in my HDMI to a monitor and left the LVDS display plugged in and it started working. At first I thought it was because it was pulling the profile from the HDMI monitor, which made sense because it was running at its resolution. But when I powered down the HDMI monitor the LVDS display still worked. So I unplugged the HDMI connector and then the LVDS display goes blank. Obviously the BBB build is compiled for 16 bit so the colors are off, I can enable the 24 bits later. But I am trying to break the HDMI plug dependency. Is disabling the HDMI port going to change this? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ce4cb562-9b37-44b1-a725-8763cda0593e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
