HI I got my BBBW board and it *was* great. I followed the instructions and tried to flash the memory using the latest image in the SD card.
I couldnt get it working for a while then finally the cylon or knightrider pattern started off. I left it to finish flashing but within few minutes, the power, wifi and bluetooth lights are all on and no more cylon pattern. I thought it may not have worked so I tried it couple more times but the cylon thing happened only once. After this, I could not get the board to connect via usb from ubuntu. The board lights up, I am guessing the bootup process starts but pretty soon all the USB0-4 lights go on and they stay on. But if I leave the card in the SD slot and then connect to usb using a cable, it starts and I can connect. But I still cannot get to connect using ssh via terminal. It keeps giving me "Host key verification failed". I tried resetting it by running 'ssh-keygen -R' followed by hostname but it keeps asking me for root password for bbb. Please tell me how I can restore my default image or how can get the new image flashed so that I can get things working again. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1f4fe622-63a6-403c-9246-02faa7fd8ffa%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
