Hi I got my new BBBW and it was working good. I followed the start page and tried to flash the memory with the latest image.
I could not get the flashing pattern like cylon or knightrider at first but after trying a few times, I finally got it. But I stopped the flash process quickly after coz the LEDs power, wifi and bt were on. I tried flashing a few more times after this but could not get it done. After this, I started having problems. The board is not recognized by the pc over USB if I remove the SD card. It just powers up, I see a few leds blink and then all the USR0-4 leds light up. If I insert the SD card and then try to connect using USB then I can open the start file and connect to the board from the browser but the ssh from terminal keeps asking for password. I want to see if this can be fixed or I want to reset the board to the factory configuration. Any help is appreciated. Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/479635ba-afac-4b5e-9ddd-7c6abe9c33eb%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
