It does, and it doesn't. If both capes use some, or all of the same pins, it probably won't work. So you'll need to do the research, and see what pins the capes use.
On Sat, Mar 25, 2017 at 7:54 AM, <[email protected]> wrote: > Currently I have a beaglebone Green connected to a Melzi board via a > bridge board for my 3D printer. The bridge board connects to the headers on > the beaglebone. > > I saw that the capes are stackable and I'd like to put the hdmi Cape on my > beaglebone, but I have the bridge board connected. Since the capes are > stackable can I plug the bridge board into the headers on the hdmi Cape? Or > does it not work like that? > > Thanks!! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/dc4ff0d1-88f6-4cc4-b4b6-3167f6313d4d%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORoJThC392z1s7EsayQqRwAuMbeYEgtOrY2vMFo0-%3DcqoA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
