Put a good 5.0 Volt 1.5 Amp power supply on the BBB before flashing. A USB cable is NOT a good power supply.
--- Graham == On Saturday, March 25, 2017 at 7:14:23 PM UTC-5, Shyam Prasad wrote: > > Hi > > I got my new BBBW and it was working good. I followed the start page and > tried to flash the memory with the latest image. > > I could not get the flashing pattern like cylon or knightrider at first > but after trying a few times, I finally got it. But I stopped the flash > process quickly after coz the LEDs power, wifi and bt were on. I tried > flashing a few more times after this but could not get it done. > > After this, I started having problems. > > The board is not recognized by the pc over USB if I remove the SD card. It > just powers up, I see a few leds blink and then all the USR0-4 leds light > up. > > If I insert the SD card and then try to connect using USB then I can open > the start file and connect to the board from the browser but the ssh from > terminal keeps asking for password. > > I want to see if this can be fixed or I want to reset the board to the > factory configuration. Any help is appreciated. > > Thanks > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/00c3e6db-ff73-4de4-b6b9-05a4654092d4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
