On Fri, Apr 21, 2017 at 10:34 AM, Mark A. Yoder <[email protected]> wrote:
> Hmmmm.... so why does config-pin work for you and not for me? > > --Mark > Hi Mark, Did yo utry loading the same overlay at boot that Robert's loading through uboot overlays ? > uboot_overlays: loading /lib/firmware/univ-bbb-xVx-00A0.dtbo ... > 73819 bytes read in 584 ms (123 KiB/s) As for the other problem you had previously. If you have not figured that out. universala was not getting loaded because another overlay had been loaded prior that was using some, or very unlikely, all the same pins. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORqSD4sTczQRZrb4rw%3DJQU7x1Hv00dz3mLV8_N2wB%3DMRJQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
