Ok, well I will try it out and let you know if it works. Do I have to disable the HDMI to avoid pin conflicts?
On Sunday, April 30, 2017 at 9:55:31 PM UTC-5, RobertCNelson wrote: > > > > On Sun, Apr 30, 2017 at 9:20 PM, David Faulkner <[email protected] > <javascript:>> wrote: > >> That link is for different dts files which I have seen before. >> So if I took one of them and compiled it to a dtbo file which is the >> correct way to enable it? >> >> I have seen it done 2 ways: >> >> 1) Through the uEvt.txt file >> 2) Using the echo command to write to the slots file >> >> Both were done with using older debian builds and I could never get it to >> work. >> >> I am running Kernal 4.4.30 so based on your post that should be ok >> correct? >> > > as long as it's a 4.4.30-ti based kernel.. > > Last week i started creating an overlay file for the newhaven 24bit lcd > cape. (BB-BONE-NH7C-01-A0.dts) > > in the process i noticed that mainline was broken with stretch on all my > 24bit lcd's, that one line diff in teh *.dtbo fixed that, it also worked > with ti's v4.4.x-ti.. > > as a side bonus, we no longer have to define the bit size in > /etc/X11/xorg.conf > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5ab46e5c-cf4b-45c3-8171-a998fba502bc%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
