I have experiance in using beaglebone black.
Iam currently using beaglebone blue.
Iam stuck with the image write process of BBBL.
Iam following the instructions in the webpage
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC
<http://www.google.com/url?q=http%3A%2F%2Felinux.org%2FBeagleboard%3ABeagleBoneBlack_Debian%23Flashing_eMMC&sa=D&sntz=1&usg=AFQjCNFZ_IMduF9Zrmz-ysiXTPzunAEk6g>
.
Eventhough Iam not able to complete the booting process.
Iam not getting any videos in youtube. Is therre any videos available
for the write process? If so, can you please share the video?
On Thursday, April 13, 2017 at 8:53:44 PM UTC+5:30, RobertCNelson wrote:
>
> On Thu, Apr 13, 2017 at 10:19 AM, chris Bruner <[email protected]
> <javascript:>> wrote:
> > There are a bunch of rc_ files in /usr/bin that do various interesting
> > things with the board.
> > Is there source code available for these?
> >
> > usr/bin/rc_balance /usr/bin/rc_test_barometer
> > /usr/bin/rc_battery_monitor /usr/bin/rc_test_buttons
> > /usr/bin/rc_benchmark_algebra /usr/bin/rc_test_cape
> > /usr/bin/rc_bind_dsm /usr/bin/rc_test_dmp
> > /usr/bin/rc_blink /usr/bin/rc_test_drivers
> > /usr/bin/rc_calibrate_dsm /usr/bin/rc_test_dsm
> > /usr/bin/rc_calibrate_escs /usr/bin/rc_test_encoders
> > /usr/bin/rc_calibrate_gyro /usr/bin/rc_test_filters
> > /usr/bin/rc_calibrate_mag /usr/bin/rc_test_imu
> > /usr/bin/rc_check_battery /usr/bin/rc_test_motors
> > /usr/bin/rc_check_model /usr/bin/rc_test_polynomial
> > /usr/bin/rc_cpu_freq /usr/bin/rc_test_servos
> > /usr/bin/rc_dsm_passthrough /usr/bin/rc_test_time
> > /usr/bin/rc_kill /usr/bin/rc_test_vector
> > /usr/bin/rc_spi_loopback /usr/bin/rc_uart_loopback
> > /usr/bin/rc_startup_routine /usr/bin/rc_version
> > /usr/bin/rc_test_adc
> > /usr/bin/rc_test_algebra
>
> https://github.com/StrawsonDesign/Robotics_Cape_Installer
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/23c0fac6-aa8a-4012-b63b-1bacf1b723b2%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
