On Thursday, May 25, 2017 at 10:24:34 AM UTC-5, RobertCNelson wrote: > > > > Either a really crappy network connection, or maybe something wrong > with the phy? > > dmesg | grep phy > dmesg | grep mdio > > > [ 0.000000] Booting Linux on physical CPU 0x0 [ 2.207846] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.208305] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] [ 2.217055] libphy: 4a101000.mdio: probed [ 2.217092] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 2.224728] 47401300.usb-phy supply vcc not found, using dummy regulator [ 2.229883] 47401b00.usb-phy supply vcc not found, using dummy regulator [ 19.014748] net eth0: phy found : id is : 0x7c0f1
and : [ 2.207818] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 2.207846] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 2.208305] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] [ 2.217055] libphy: 4a101000.mdio: probed [ 2.217092] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 I've been logged into the system over the ethernet with ssh -X for an hour, no problems. One thing, I disabled connman with this command : apt remove connman so that I could set up static IP address and it would leave it alone. Still trying to see if it is something I did wrong... Thanks very much, Jon -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/dc6a73c5-da1b-408e-92f8-604c45de28c7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
