Hi recently I bought a Beaglebone Black. And I need to use GPI read with PRU.
I found some examples how to use PRUSS like am335x_pru_package.(the link below) https://github.com/beagleboard/am335x_pru_package/blob/master/pru_sw/app_loader/interface/__prussdrv.h There are some defined values to use AM33XX's PRUSS. But I need to run that code in BeagleBoard-X15 to use PRUSS in AM5728. I read about migration guide from the link below. http://processors.wiki.ti.com/index.php/PRU-ICSS_Migration_Guide:_AM335x_to_AM57x But I think it's hard to change am335x_pru_package's code for migration. Is there any support for migration AM33XX PRU to AM5728 PRU? It's hard to find about PRUSS migration code from internet. Please let me know if there is any support like this case. Thank you very much. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ff71b0f4-8a4b-4c2b-88c7-f9bc1f7e99ac%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
