Peter: Edit the line in /boot/uEnv.txt
cmdline=coherent_pool=1M net.ifnames=0 quiet cape_universal=enable to remove the work 'quiet' --- Graham == On Monday, May 29, 2017 at 4:35:24 PM UTC-5, Peter Lawler wrote: > > Hi! > Just wondering if something's changed recently in the way the Serial > Debug Header operates? > > I'm asking because I've grabbed the recent release, updated to stretch, > and OK yes sure added a couple of what I'd call 'basic' things in - > nothing too major - but now I don't get access via the Serial Debug > Header. All output looks normal on boot and I can't see anything in > particular standing out in the boot log, either. > > It may well be that I'm missing sufficient amounts of coffee. But any > thoughts/comments appreciated at this stage. > > Cheers, > > Pete. > > > Output on Serial Debug: > > U-Boot SPL 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26) > Trying to boot from MMC2 > > > U-Boot 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26 -0500), Build: > jenkins-github_Bootloader-Builder-532 > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > <ethaddr> not set. Validating first E-fuse MAC > BeagleBone Black: > BeagleBone: cape eeprom: i2c_probe: 0x54: > BeagleBone: cape eeprom: i2c_probe: 0x55: > BeagleBone: cape eeprom: i2c_probe: 0x56: > BeagleBone: cape eeprom: i2c_probe: 0x57: > Net: eth0: MII MODE > cpsw > Press SPACE to abort autoboot in 2 seconds > board_name=[A335BNLT] ... > board_rev=[00A5] ... > switch to partitions #0, OK > mmc0 is current device > SD/MMC found on device 0 > ** Bad device 0:2 0x82000000 ** > ** Bad device 0:2 0x82000000 ** > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > gpio: pin 56 (gpio 56) value is 0 > gpio: pin 55 (gpio 55) value is 0 > gpio: pin 54 (gpio 54) value is 0 > gpio: pin 53 (gpio 53) value is 1 > switch to partitions #0, OK > mmc0 is current device > gpio: pin 54 (gpio 54) value is 1 > Checking for: /uEnv.txt ... > Checking for: /boot.scr ... > Checking for: /boot/boot.scr ... > Checking for: /boot/uEnv.txt ... > gpio: pin 55 (gpio 55) value is 1 > 1972 bytes read in 42 ms (44.9 KiB/s) > Loaded environment from /boot/uEnv.txt > Checking if uname_r is set in /boot/uEnv.txt... > gpio: pin 56 (gpio 56) value is 1 > Running uname_boot ... > loading /boot/vmlinuz-4.4.68-ti-r106 ... > 8608104 bytes read in 590 ms (13.9 MiB/s) > loading /boot/dtbs/4.4.68-ti-r106/am335x-boneblack.dtb ... > 56827 bytes read in 88 ms (629.9 KiB/s) > uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to > enable... > loading /boot/initrd.img-4.4.68-ti-r106 ... > 5940425 bytes read in 424 ms (13.4 MiB/s) > debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable] ... > debug: [bootz 0x82000000 0x88080000:5aa4c9 0x88000000] ... > ## Flattened Device Tree blob at 88000000 > Booting using the fdt blob at 0x88000000 > Loading Ramdisk to 8fa55000, end 8ffff4c9 ... OK > Loading Device Tree to 8fa44000, end 8fa54dfa ... OK > > Starting kernel ... > > [ 0.001026] clocksource_probe: no matching clocksources found > [ 2.109460] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc > handle > [ 2.291426] omap_voltage_late_init: Voltage driver support not added > [ 2.299156] PM: Cannot get wkup_m3_ipc handle > rootfs: clean, 112476/959616 files, 663500/3888512 blocks > > Debian GNU/Linux 9 beaglebone ttyS0 > beaglebone login: > > ------------------------------- > > dmesg > > [ 0.000000] Booting Linux on physical CPU 0x0 > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Initializing cgroup subsys cpuacct > [ 0.000000] Linux version 4.4.68-ti-r106 (root@b1-omap5-uevm-2gb) > (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Sat May 27 > 15:52:44 UTC 2017 > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), > cr=10c5387d > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing > instruction cache > [ 0.000000] Machine model: TI AM335x BeagleBone Black > [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 > [ 0.000000] Memory policy: Data cache writeback > [ 0.000000] On node 0 totalpages: 130560 > [ 0.000000] free_area_init_node: node 0, pgdat c1059200, node_mem_map > df961000 > [ 0.000000] Normal zone: 1152 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 > [ 0.000000] CPU: All CPU(s) started in SVC mode. > [ 0.000000] AM335X ES2.1 (sgx neon ) > [ 0.000000] PERCPU: Embedded 13 pages/cpu @df920000 s24268 r8192 > d20788 u53248 > [ 0.000000] pcpu-alloc: s24268 r8192 d20788 u53248 alloc=13*4096 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 129408 > [ 0.000000] Kernel command line: console=ttyO0,115200n8 > root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M > net.ifnames=0 quiet cape_universal=enable > [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.000000] Memory: 444100K/522240K available (11362K kernel code, > 917K rwdata, 3796K rodata, 736K init, 907K bss, 28988K reserved, 49152K > cma-reserved, 0K highmem) > [ 0.000000] Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xffc00000 - 0xfff00000 (3072 kB) > vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) > lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) > pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > .text : 0xc0008000 - 0xc0ed5e08 (15160 kB) > .init : 0xc0ed6000 - 0xc0f8e000 ( 736 kB) > .data : 0xc0f8e000 - 0xc10734e8 ( 918 kB) > .bss : 0xc1076000 - 0xc1158d10 ( 908 kB) > [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] Build-time adjustment of leaf fanout to 32. > [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to > nr_cpu_ids=1. > [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, > nr_cpu_ids=1 > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 > interrupts > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz > [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps > every 89478484971ns > [ 0.000035] clocksource: timer1: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 79635851949 ns > [ 0.000048] OMAP clocksource: timer1 at 24000000 Hz > [ 0.001026] clocksource_probe: no matching clocksources found > [ 0.001228] Console: colour dummy device 80x30 > [ 0.001259] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' > [ 0.001267] This ensures that you still see kernel messages. Please > [ 0.001274] update your kernel commandline. > [ 0.001294] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) > [ 0.046812] pid_max: default: 32768 minimum: 301 > [ 0.046963] Security Framework initialized > [ 0.046976] Yama: becoming mindful. > [ 0.047013] AppArmor: AppArmor disabled by boot time parameter > [ 0.047186] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.047198] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.048070] Initializing cgroup subsys io > [ 0.048106] Initializing cgroup subsys memory > [ 0.048153] Initializing cgroup subsys devices > [ 0.048171] Initializing cgroup subsys freezer > [ 0.048188] Initializing cgroup subsys net_cls > [ 0.048202] Initializing cgroup subsys perf_event > [ 0.048217] Initializing cgroup subsys net_prio > [ 0.048241] Initializing cgroup subsys pids > [ 0.048300] CPU: Testing write buffer coherency: ok > [ 0.048361] ftrace: allocating 34469 entries in 102 pages > [ 0.146019] CPU0: thread -1, cpu 0, socket -1, mpidr 0 > [ 0.146150] Setting up static identity map for 0x80008280 - 0x800082e0 > [ 0.150305] Brought up 1 CPUs > [ 0.150330] SMP: Total of 1 processors activated (995.32 BogoMIPS). > [ 0.150339] CPU: All CPU(s) started in SVC mode. > [ 0.152069] devtmpfs: initialized > [ 0.170126] VFP support v0.3: implementor 41 architecture 3 part 30 > variant c rev 3 > [ 0.190157] omap_hwmod: debugss: _wait_target_disable failed > [ 0.231485] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.231522] futex hash table entries: 256 (order: 2, 16384 bytes) > [ 0.235643] xor: measuring software checksum speed > [ 0.274812] arm4regs : 1219.000 MB/sec > [ 0.314806] 8regs : 1092.000 MB/sec > [ 0.354806] 32regs : 1089.000 MB/sec > [ 0.394805] neon : 1747.000 MB/sec > [ 0.394813] xor: using function: neon (1747.000 MB/sec) > [ 0.394938] pinctrl core: initialized pinctrl subsystem > [ 0.396972] NET: Registered protocol family 16 > [ 0.400698] DMA: preallocated 1024 KiB pool for atomic coherent > allocations > [ 0.401942] cpuidle: using governor ladder > [ 0.401960] cpuidle: using governor menu > [ 0.407752] OMAP GPIO hardware version 0.1 > [ 0.420018] No ATAGs? > [ 0.420055] hw-breakpoint: debug architecture 0x4 unsupported. > [ 0.420576] omap4_sram_init:Unable to allocate sram needed to handle > errata I688 > [ 0.420594] omap4_sram_init:Unable to get sram pool needed to handle > errata I688 > [ 0.498880] raid6: int32x1 gen() 263 MB/s > [ 0.566912] raid6: int32x1 xor() 223 MB/s > [ 0.634930] raid6: int32x2 gen() 330 MB/s > [ 0.702811] raid6: int32x2 xor() 283 MB/s > [ 0.770812] raid6: int32x4 gen() 328 MB/s > [ 0.838820] raid6: int32x4 xor() 267 MB/s > [ 0.906902] raid6: int32x8 gen() 300 MB/s > [ 0.974927] raid6: int32x8 xor() 231 MB/s > [ 1.042825] raid6: neonx1 gen() 1453 MB/s > [ 1.110819] raid6: neonx1 xor() 846 MB/s > [ 1.178836] raid6: neonx2 gen() 1936 MB/s > [ 1.246826] raid6: neonx2 xor() 1197 MB/s > [ 1.314846] raid6: neonx4 gen() 989 MB/s > [ 1.382804] raid6: neonx4 xor() 827 MB/s > [ 1.450810] raid6: neonx8 gen() 1037 MB/s > [ 1.518810] raid6: neonx8 xor() 757 MB/s > [ 1.518818] raid6: using algorithm neonx2 gen() 1936 MB/s > [ 1.518825] raid6: .... xor() 1197 MB/s, rmw enabled > [ 1.518832] raid6: using intx1 recovery algorithm > [ 1.528201] edma 49000000.edma: TI EDMA DMA engine driver > [ 1.532930] SCSI subsystem initialized > [ 1.533369] libata version 3.00 loaded. > [ 1.533720] usbcore: registered new interface driver usbfs > [ 1.533810] usbcore: registered new interface driver hub > [ 1.533917] usbcore: registered new device driver usb > [ 1.534521] omap_i2c 44e0b000.i2c: could not find pctldev for node > /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring > probe > [ 1.534577] omap_i2c 4819c000.i2c: could not find pctldev for node > /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring > probe > [ 1.534703] media: Linux media interface: v0.10 > [ 1.534764] Linux video capture interface: v2.00 > [ 1.534983] pps_core: LinuxPPS API ver. 1 registered > [ 1.534991] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <[email protected] <javascript:>> > [ 1.535023] PTP clock support registered > [ 1.535958] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 > [ 1.537415] NetLabel: Initializing > [ 1.537430] NetLabel: domain hash size = 128 > [ 1.537436] NetLabel: protocols = UNLABELED CIPSOv4 > [ 1.537500] NetLabel: unlabeled traffic allowed by default > [ 1.537916] clocksource: Switched to clocksource timer1 > [ 1.650267] NET: Registered protocol family 2 > [ 1.651115] TCP established hash table entries: 4096 (order: 2, 16384 > bytes) > [ 1.651167] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) > [ 1.651227] TCP: Hash tables configured (established 4096 bind 4096) > [ 1.651304] UDP hash table entries: 256 (order: 1, 8192 bytes) > [ 1.651326] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) > [ 1.651655] NET: Registered protocol family 1 > [ 1.652271] RPC: Registered named UNIX socket transport module. > [ 1.652285] RPC: Registered udp transport module. > [ 1.652292] RPC: Registered tcp transport module. > [ 1.652299] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 1.652953] Unpacking initramfs... > [ 2.078116] Freeing initrd memory: 5804K (cfa55000 - d0000000) > [ 2.078874] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 > counters available > [ 2.081627] audit: initializing netlink subsys (disabled) > [ 2.081725] audit: type=2000 audit(2.012:1): initialized > [ 2.092275] zbud: loaded > [ 2.093031] VFS: Disk quotas dquot_6.6.0 > [ 2.093317] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 > bytes) > [ 2.096066] NFS: Registering the id_resolver key type > [ 2.096145] Key type id_resolver registered > [ 2.096155] Key type id_legacy registered > [ 2.096185] nfs4filelayout_init: NFSv4 File Layout Driver > Registering... > [ 2.096567] fuse init (API version 7.23) > [ 2.097204] SGI XFS with ACLs, security attributes, realtime, no > debug enabled > [ 2.105762] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 249) > [ 2.106161] io scheduler noop registered > [ 2.106180] io scheduler deadline registered > [ 2.106255] io scheduler cfq registered (default) > [ 2.107663] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > [ 2.109460] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc > handle > [ 2.111193] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled > [ 2.114540] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, > base_baud = 3000000) is a 8250 > [ 2.127845] console [ttyS0] enabled > [ 2.129400] [drm] Initialized drm 1.1.0 20060810 > [ 2.181974] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 > [ 2.182000] davinci_mdio 4a101000.mdio: detected phy mask fffffffe > [ 2.182391] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] > [ 2.189520] libphy: 4a101000.mdio: probed > [ 2.189556] davinci_mdio 4a101000.mdio: phy[0]: device > 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 > [ 2.190497] cpsw 4a100000.ethernet: Detected MACID = d0:39:72:3b:d9:be > [ 2.190641] cpsw 4a100000.ethernet: cpts: overflow check period 2125 > [ 2.192433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > [ 2.192499] ehci-platform: EHCI generic platform driver > [ 2.192687] ehci-omap: OMAP-EHCI Host Controller driver > [ 2.193129] usbcore: registered new interface driver usb-storage > [ 2.195502] 47401300.usb-phy supply vcc not found, using dummy > regulator > [ 2.198266] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk > combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) > [ 2.198286] musb-hdrc: MHDRC RTL version 2.0 > [ 2.198295] musb-hdrc: setup fifo_mode 4 > [ 2.198315] musb-hdrc: 28/31 max ep, 16384/16384 memory > [ 2.199947] 47401b00.usb-phy supply vcc not found, using dummy > regulator > [ 2.202513] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk > combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) > [ 2.202531] musb-hdrc: MHDRC RTL version 2.0 > [ 2.202539] musb-hdrc: setup fifo_mode 4 > [ 2.202555] musb-hdrc: 28/31 max ep, 16384/16384 memory > [ 2.202729] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver > [ 2.202767] musb-hdrc musb-hdrc.1.auto: new USB bus registered, > assigned bus number 1 > [ 2.203055] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.203069] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.203079] usb usb1: Product: MUSB HDRC host driver > [ 2.203088] usb usb1: Manufacturer: Linux 4.4.68-ti-r106 musb-hcd > [ 2.203097] usb usb1: SerialNumber: musb-hdrc.1.auto > [ 2.203993] hub 1-0:1.0: USB hub found > [ 2.204055] hub 1-0:1.0: 1 port detected > [ 2.214084] mousedev: PS/2 mouse device common for all mice > [ 2.216603] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc > as rtc0 > [ 2.217446] i2c /dev entries driver > [ 2.219282] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout > 60 sec > [ 2.219711] cpuidle: enable-method property 'ti,am3352' found > operations > [ 2.220421] omap_hsmmc 48060000.mmc: Got CD GPIO > [ 2.283565] hidraw: raw HID events driver (C) Jiri Kosina > [ 2.284311] usbcore: registered new interface driver usbhid > [ 2.284325] usbhid: USB HID core driver > [ 2.284619] ashmem: initialized > [ 2.285455] remoteproc0: wkup_m3 is available > [ 2.285471] remoteproc0: Note: remoteproc is still under development > and considered experimental. > [ 2.285479] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and > backward compatibility isn't yet guaranteed. > [ 2.289052] NET: Registered protocol family 10 > [ 2.290931] mip6: Mobile IPv6 > [ 2.290962] NET: Registered protocol family 17 > [ 2.291110] Key type dns_resolver registered > [ 2.291127] mpls_gso: MPLS GSO support > [ 2.291426] omap_voltage_late_init: Voltage driver support not added > [ 2.299156] PM: Cannot get wkup_m3_ipc handle > [ 2.303997] ThumbEE CPU extension supported. > [ 2.304035] Registering SWP/SWPB emulation handler > [ 2.305095] registered taskstats version 1 > [ 2.305298] zswap: loaded using pool lzo/zbud > [ 2.309824] Btrfs loaded > [ 2.314022] mmc0: host does not support reading read-only switch, > assuming write-enable > [ 2.315979] mmc0: new high speed SDHC card at address e624 > [ 2.322231] mmcblk0: mmc0:e624 SU16G 14.8 GiB > [ 2.324053] mmcblk0: p1 > [ 2.344476] Key type encrypted registered > [ 2.347739] input: tps65217_pwr_but as > /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0 > [ 2.367643] mmc1: MAN_BKOPS_EN bit is not set > [ 2.372351] mmc1: new high speed MMC card at address 0001 > [ 2.373478] mmcblk1: mmc1:0001 MMC04G 3.60 GiB > [ 2.373776] tps65217 0-0024: TPS65217 ID 0xe version 1.2 > [ 2.374463] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 2.374723] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz > [ 2.376877] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 2.377315] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 2.377709] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 2.378239] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 > bytes/write > [ 2.378293] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz > [ 2.379101] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB > [ 2.379889] remoteproc0: powering up wkup_m3 > [ 2.379955] remoteproc0: Booting fw image am335x-pm-firmware.elf, > size 217148 > [ 2.380222] remoteproc0: remote processor wkup_m3 is now up > [ 2.380245] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = > 0x192 > [ 2.380970] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB > [ 2.382466] mmcblk1: p1 > [ 2.386092] bone_capemgr bone_capemgr: Baseboard: > 'A335BNLT,00A5,5002BBBK8600' > [ 2.386133] bone_capemgr bone_capemgr: > compatible-baseboard=ti,beaglebone-black - #slots=4 > [ 2.425934] bone_capemgr bone_capemgr: slot #0: No cape found > [ 2.465923] bone_capemgr bone_capemgr: slot #1: No cape found > [ 2.505924] bone_capemgr bone_capemgr: slot #2: No cape found > [ 2.545922] bone_capemgr bone_capemgr: slot #3: No cape found > [ 2.546028] bone_capemgr bone_capemgr: initialized OK. > [ 2.548168] PM: bootloader does not support rtc-only! > [ 2.549187] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 > 00:00:00 UTC (946684800) > [ 2.549216] of_cfs_init > [ 2.549350] of_cfs_init: OK > [ 2.555005] PM: Hibernation image not present or could not be loaded. > [ 2.556439] Freeing unused kernel memory: 736K (c0ed6000 - c0f8e000) > [ 2.691867] random: systemd-udevd: uninitialized urandom read (16 > bytes read, 14 bits of entropy available) > [ 2.692554] random: systemd-udevd: uninitialized urandom read (16 > bytes read, 14 bits of entropy available) > [ 2.692671] random: systemd-udevd: uninitialized urandom read (16 > bytes read, 14 bits of entropy available) > [ 2.711363] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 2.711748] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 2.711925] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 2.712618] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 2.713195] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 2.713692] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 2.714595] random: udevadm: uninitialized urandom read (16 bytes > read, 14 bits of entropy available) > [ 3.945620] ti-pruss 4a300000.pruss: creating PRU cores and other > child platform devices > [ 3.970267] irq: no irq domain found for > /ocp/pruss@4a300000/intc@4a320000 ! > [ 3.971159] irq: no irq domain found for > /ocp/pruss@4a300000/intc@4a320000 ! > [ 4.009459] remoteproc1: 4a334000.pru0 is available > [ 4.009485] remoteproc1: Note: remoteproc is still under development > and considered experimental. > [ 4.009494] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and > backward compatibility isn't yet guaranteed. > [ 4.012325] pru-rproc 4a334000.pru0: booting the PRU core manually > [ 4.012354] remoteproc1: powering up 4a334000.pru0 > [ 4.012623] remoteproc1: Booting fw image am335x-pru0-fw, size 36296 > [ 4.012694] remoteproc1: remote processor 4a334000.pru0 is now up > [ 4.012729] pru-rproc 4a334000.pru0: PRU rproc node > /ocp/pruss@4a300000/pru0@4a334000 probed successfully > [ 4.026653] remoteproc2: 4a338000.pru1 is available > [ 4.026672] remoteproc2: Note: remoteproc is still under development > and considered experimental. > [ 4.026680] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and > backward compatibility isn't yet guaranteed. > [ 4.030624] pru-rproc 4a338000.pru1: booting the PRU core manually > [ 4.030656] remoteproc2: powering up 4a338000.pru1 > [ 4.030941] remoteproc2: Booting fw image am335x-pru1-fw, size 35384 > [ 4.031015] remoteproc2: remote processor 4a338000.pru1 is now up > [ 4.031049] pru-rproc 4a338000.pru1: PRU rproc node > /ocp/pruss@4a300000/pru1@4a338000 probed successfully > [ 4.593895] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data > mode. Opts: (null) > [ 5.271150] systemd[1]: System time before build time, advancing clock. > [ 5.380373] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 5.444177] systemd[1]: systemd 232 running in system mode. (+PAM > +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP > +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) > [ 5.444857] systemd[1]: Detected architecture arm. > [ 5.447125] systemd[1]: Set hostname to <beaglebone>. > [ 6.325398] systemd[1]: Listening on Journal Socket. > [ 6.326742] systemd[1]: Listening on Journal Socket (/dev/log). > [ 6.327315] systemd[1]: Started Dispatch Password Requests to Console > Directory Watch. > [ 6.327764] systemd[1]: Started Forward Password Requests to Wall > Directory Watch. > [ 6.328181] systemd[1]: Listening on /dev/initctl Compatibility Named > Pipe. > [ 6.328528] systemd[1]: Listening on Syslog Socket. > [ 6.330392] systemd[1]: Set up automount Arbitrary Executable File > Formats File System Automount Point. > [ 6.330859] systemd[1]: Listening on udev Kernel Socket. > [ 6.331068] systemd[1]: Reached target Encrypted Volumes. > [ 6.332340] systemd[1]: Created slice System Slice. > [ 6.333538] systemd[1]: Created slice system-getty.slice. > [ 6.339068] systemd[1]: Starting Create list of required static > device nodes for the current kernel... > [ 6.369052] systemd[1]: Starting Load Kernel Modules... > [ 6.396261] systemd[1]: Listening on udev Control Socket. > [ 6.417680] systemd[1]: Mounting POSIX Message Queue File System... > [ 6.470369] systemd[1]: Reached target Remote File Systems. > [ 6.508352] systemd[1]: Mounting /sys/kernel/debug... > [ 6.533689] systemd[1]: Listening on Journal Audit Socket. > [ 6.646881] systemd[1]: Starting Journal Service... > [ 6.647236] systemd[1]: Reached target Paths. > [ 6.648542] systemd[1]: Created slice User and Session Slice. > [ 6.648828] systemd[1]: Reached target Slices. > [ 6.715234] systemd[1]: Created slice system-serial\x2dgetty.slice. > [ 6.715738] systemd[1]: Reached target Swap. > [ 6.716169] systemd[1]: Listening on fsck to fsckd communication > Socket. > [ 6.750791] systemd[1]: Starting Remount Root and Kernel File > Systems... > [ 6.800368] systemd[1]: Starting Uncomplicated firewall... > [ 6.953876] systemd[1]: Mounted POSIX Message Queue File System. > [ 6.987273] systemd[1]: Mounted /sys/kernel/debug. > [ 6.989330] systemd[1]: Started Create list of required static device > nodes for the current kernel. > [ 7.012462] systemd[1]: Started Load Kernel Modules. > [ 7.024685] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro > [ 7.040681] systemd[1]: Started Remount Root and Kernel File Systems. > [ 7.059287] systemd[1]: Started Uncomplicated firewall. > [ 7.125013] systemd[1]: Starting udev Coldplug all Devices... > [ 7.148552] systemd[1]: Starting Load/Save Random Seed... > [ 7.258243] systemd[1]: Mounting Configuration File System... > [ 7.334795] systemd[1]: Mounting FUSE Control File System... > [ 7.412609] systemd[1]: Starting Apply Kernel Variables... > [ 7.614736] systemd[1]: Starting Create Static Device Nodes in /dev... > [ 7.732042] systemd[1]: Mounted FUSE Control File System. > [ 7.732449] systemd[1]: Mounted Configuration File System. > [ 7.733275] systemd[1]: Started Journal Service. > [ 8.591203] systemd-journald[199]: Received request to flush runtime > journal from PID 1 > [ 11.582053] random: nonblocking pool is initialized > [ 14.593293] nf_conntrack version 0.5.0 (7809 buckets, 31236 max) > [ 15.503329] using random self ethernet address > [ 15.503359] using random host ethernet address > [ 15.612457] using random self ethernet address > [ 15.612487] using random host ethernet address > [ 15.666744] net eth0: initializing cpsw version 1.12 (0) > [ 15.666776] net eth0: initialized cpsw ale version 1.4 > [ 15.666787] net eth0: ALE Table size 1024 > [ 15.811063] net eth0: phy found : id is : 0x7c0f1 > [ 15.876945] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 15.932717] Mass Storage Function, version: 2009/09/11 > [ 15.932751] LUN: removable file: (no medium) > [ 16.302180] usb0: HOST MAC d0:39:72:3b:d9:bf > [ 16.303720] usb0: MAC d0:39:72:3b:d9:c0 > [ 16.315427] usb1: HOST MAC d0:39:72:3b:d9:c2 > [ 16.315807] usb1: MAC d0:39:72:3b:d9:c3 > [ 18.015554] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready > [ 18.308196] Process accounting resumed > [ 18.632550] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready > [ 19.842946] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - > flow control rx/tx > [ 19.843038] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 20.073708] 8021q: 802.1Q VLAN Support v1.8 > [ 20.073807] 8021q: adding VLAN 0 to HW filter on device eth0 > [ 32.839888] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 > [ 33.272297] tda998x 0-0070: found TDA19988 > [ 33.277478] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops > [tda998x]) > [ 33.277518] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 33.277526] [drm] No driver support for vblank timestamp query. > [ 33.295817] tilcdc 4830e000.lcdc: No connectors reported connected > with modes > [ 33.295864] [drm] Cannot find any crtc or sizes - going 1024x768 > [ 34.206347] Console: switching to colour frame buffer device 128x48 > [ 34.626201] tilcdc 4830e000.lcdc: fb0: frame buffer device > [ 34.626251] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 > [ 37.368582] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 > [ 37.506564] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 > [ 38.154607] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 > [ 42.764748] bone_capemgr bone_capemgr: part_number 'cape-universal', > version 'N/A' > [ 42.764792] bone_capemgr bone_capemgr: slot #4: override > [ 42.764808] bone_capemgr bone_capemgr: Using override eeprom data at > slot 4 > [ 42.764826] bone_capemgr bone_capemgr: slot #4: 'Override Board > Name,00A0,Override Manuf,cape-universal' > [ 43.371027] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 > [ 43.371273] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 > [ 43.371454] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 > [ 43.371624] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 > [ 43.371792] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 > [ 43.371952] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 > [ 43.372117] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 > [ 43.372280] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 > [ 43.372445] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 > [ 43.372614] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 > [ 43.394347] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 > [ 43.394589] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 > [ 43.394789] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 > [ 43.394961] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 > [ 43.395131] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 > [ 43.395297] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 > [ 43.395456] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 > [ 43.395625] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 > [ 43.395788] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 > [ 43.395949] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 > [ 43.396118] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 > [ 43.396372] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 > [ 43.396555] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 > [ 43.396726] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 > [ 43.396888] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 > [ 43.397054] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 > [ 43.397218] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 > [ 43.397379] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 > [ 43.397546] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 > [ 43.397710] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 > [ 43.397874] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 > [ 43.418470] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 > [ 43.418700] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 > [ 43.418714] gpio-of-helper ocp:cape-universal: ready > [ 43.434371] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 199, > base_baud = 3000000) is a 8250 > [ 43.454354] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 200, > base_baud = 3000000) is a 8250 > [ 43.462577] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp > mapping ok > [ 43.470552] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 201, > base_baud = 3000000) is a 8250 > [ 43.495255] eqep 48300180.eqep: ver. 1.0 > [ 43.516204] eqep 48302180.eqep: ver. 1.0 > [ 43.559178] eqep 48304180.eqep: ver. 1.0 > [ 43.586428] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz > [ 43.601089] bone_capemgr bone_capemgr: slot #4: dtbo > 'cape-universal-00A0.dtbo' loaded; overlay id #0 > [ 55.362249] CAN device driver interface > [ 55.435910] c_can_platform 481cc000.can: c_can_platform device > registered (regs=fa1cc000, irq=210) > [ 55.483194] c_can_platform 481d0000.can: c_can_platform device > registered (regs=fa1d0000, irq=211) > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/52e1dd9b-88be-473f-a879-1d90778b769f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
