Graham, that wont fix the issue. The problem he's having is because the OS( Linux ) is not setup to use the serial interface. You can tell, because he is getting serial messages from the kernel until after the kernel is loaded. Which means the rootfs is meant to "take over" but isn't.
On Mon, May 29, 2017 at 4:46 PM, Graham <gh78...@gmail.com> wrote: > Peter: > > Edit the line in /boot/uEnv.txt > > cmdline=coherent_pool=1M net.ifnames=0 quiet cape_universal=enable > > to remove the work 'quiet' > > --- Graham > > == > > > On Monday, May 29, 2017 at 4:35:24 PM UTC-5, Peter Lawler wrote: > >> Hi! >> Just wondering if something's changed recently in the way the Serial >> Debug Header operates? >> >> I'm asking because I've grabbed the recent release, updated to stretch, >> and OK yes sure added a couple of what I'd call 'basic' things in - >> nothing too major - but now I don't get access via the Serial Debug >> Header. All output looks normal on boot and I can't see anything in >> particular standing out in the boot log, either. >> >> It may well be that I'm missing sufficient amounts of coffee. But any >> thoughts/comments appreciated at this stage. >> >> Cheers, >> >> Pete. >> >> >> Output on Serial Debug: >> >> U-Boot SPL 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26) >> Trying to boot from MMC2 >> >> >> U-Boot 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26 -0500), Build: >> jenkins-github_Bootloader-Builder-532 >> >> CPU : AM335X-GP rev 2.1 >> I2C: ready >> DRAM: 512 MiB >> Reset Source: Power-on reset has occurred. >> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> Using default environment >> >> <ethaddr> not set. Validating first E-fuse MAC >> BeagleBone Black: >> BeagleBone: cape eeprom: i2c_probe: 0x54: >> BeagleBone: cape eeprom: i2c_probe: 0x55: >> BeagleBone: cape eeprom: i2c_probe: 0x56: >> BeagleBone: cape eeprom: i2c_probe: 0x57: >> Net: eth0: MII MODE >> cpsw >> Press SPACE to abort autoboot in 2 seconds >> board_name=[A335BNLT] ... >> board_rev=[00A5] ... >> switch to partitions #0, OK >> mmc0 is current device >> SD/MMC found on device 0 >> ** Bad device 0:2 0x82000000 ** >> ** Bad device 0:2 0x82000000 ** >> switch to partitions #0, OK >> mmc0 is current device >> Scanning mmc 0:1... >> gpio: pin 56 (gpio 56) value is 0 >> gpio: pin 55 (gpio 55) value is 0 >> gpio: pin 54 (gpio 54) value is 0 >> gpio: pin 53 (gpio 53) value is 1 >> switch to partitions #0, OK >> mmc0 is current device >> gpio: pin 54 (gpio 54) value is 1 >> Checking for: /uEnv.txt ... >> Checking for: /boot.scr ... >> Checking for: /boot/boot.scr ... >> Checking for: /boot/uEnv.txt ... >> gpio: pin 55 (gpio 55) value is 1 >> 1972 bytes read in 42 ms (44.9 KiB/s) >> Loaded environment from /boot/uEnv.txt >> Checking if uname_r is set in /boot/uEnv.txt... >> gpio: pin 56 (gpio 56) value is 1 >> Running uname_boot ... >> loading /boot/vmlinuz-4.4.68-ti-r106 ... >> 8608104 bytes read in 590 ms (13.9 MiB/s) >> loading /boot/dtbs/4.4.68-ti-r106/am335x-boneblack.dtb ... >> 56827 bytes read in 88 ms (629.9 KiB/s) >> uboot_overlays: add [enable_uboot_overlays=1] to /boot/uEnv.txt to >> enable... >> loading /boot/initrd.img-4.4.68-ti-r106 ... >> 5940425 bytes read in 424 ms (13.4 MiB/s) >> debug: [console=ttyO0,115200n8 root=/dev/mmcblk0p1 ro rootfstype=ext4 >> rootwait coherent_pool=1M net.ifnames=0 quiet cape_universal=enable] ... >> debug: [bootz 0x82000000 0x88080000:5aa4c9 0x88000000] ... >> ## Flattened Device Tree blob at 88000000 >> Booting using the fdt blob at 0x88000000 >> Loading Ramdisk to 8fa55000, end 8ffff4c9 ... OK >> Loading Device Tree to 8fa44000, end 8fa54dfa ... OK >> >> Starting kernel ... >> >> [ 0.001026] clocksource_probe: no matching clocksources found >> [ 2.109460] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc >> handle >> [ 2.291426] omap_voltage_late_init: Voltage driver support not added >> [ 2.299156] PM: Cannot get wkup_m3_ipc handle >> rootfs: clean, 112476/959616 files, 663500/3888512 blocks >> >> Debian GNU/Linux 9 beaglebone ttyS0 >> beaglebone login: >> >> ------------------------------- >> >> dmesg >> >> [ 0.000000] Booting Linux on physical CPU 0x0 >> [ 0.000000] Initializing cgroup subsys cpuset >> [ 0.000000] Initializing cgroup subsys cpu >> [ 0.000000] Initializing cgroup subsys cpuacct >> [ 0.000000] Linux version 4.4.68-ti-r106 (root@b1-omap5-uevm-2gb) >> (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Sat May 27 >> 15:52:44 UTC 2017 >> [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), >> cr=10c5387d >> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >> instruction cache >> [ 0.000000] Machine model: TI AM335x BeagleBone Black >> [ 0.000000] cma: Reserved 48 MiB at 0x9c800000 >> [ 0.000000] Memory policy: Data cache writeback >> [ 0.000000] On node 0 totalpages: 130560 >> [ 0.000000] free_area_init_node: node 0, pgdat c1059200, node_mem_map >> df961000 >> [ 0.000000] Normal zone: 1152 pages used for memmap >> [ 0.000000] Normal zone: 0 pages reserved >> [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 >> [ 0.000000] CPU: All CPU(s) started in SVC mode. >> [ 0.000000] AM335X ES2.1 (sgx neon ) >> [ 0.000000] PERCPU: Embedded 13 pages/cpu @df920000 s24268 r8192 >> d20788 u53248 >> [ 0.000000] pcpu-alloc: s24268 r8192 d20788 u53248 alloc=13*4096 >> [ 0.000000] pcpu-alloc: [0] 0 >> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> Total pages: 129408 >> [ 0.000000] Kernel command line: console=ttyO0,115200n8 >> root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M >> net.ifnames=0 quiet cape_universal=enable >> [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) >> [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 >> bytes) >> [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 >> bytes) >> [ 0.000000] Memory: 444100K/522240K available (11362K kernel code, >> 917K rwdata, 3796K rodata, 736K init, 907K bss, 28988K reserved, 49152K >> cma-reserved, 0K highmem) >> [ 0.000000] Virtual kernel memory layout: >> vector : 0xffff0000 - 0xffff1000 ( 4 kB) >> fixmap : 0xffc00000 - 0xfff00000 (3072 kB) >> vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) >> lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) >> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >> modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >> .text : 0xc0008000 - 0xc0ed5e08 (15160 kB) >> .init : 0xc0ed6000 - 0xc0f8e000 ( 736 kB) >> .data : 0xc0f8e000 - 0xc10734e8 ( 918 kB) >> .bss : 0xc1076000 - 0xc1158d10 ( 908 kB) >> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 >> [ 0.000000] Hierarchical RCU implementation. >> [ 0.000000] Build-time adjustment of leaf fanout to 32. >> [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to >> nr_cpu_ids=1. >> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, >> nr_cpu_ids=1 >> [ 0.000000] NR_IRQS:16 nr_irqs:16 16 >> [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 >> interrupts >> [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz >> [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps >> every 89478484971ns >> [ 0.000035] clocksource: timer1: mask: 0xffffffff max_cycles: >> 0xffffffff, max_idle_ns: 79635851949 ns >> [ 0.000048] OMAP clocksource: timer1 at 24000000 Hz >> [ 0.001026] clocksource_probe: no matching clocksources found >> [ 0.001228] Console: colour dummy device 80x30 >> [ 0.001259] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' >> [ 0.001267] This ensures that you still see kernel messages. Please >> [ 0.001274] update your kernel commandline. >> [ 0.001294] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) >> [ 0.046812] pid_max: default: 32768 minimum: 301 >> [ 0.046963] Security Framework initialized >> [ 0.046976] Yama: becoming mindful. >> [ 0.047013] AppArmor: AppArmor disabled by boot time parameter >> [ 0.047186] Mount-cache hash table entries: 1024 (order: 0, 4096 >> bytes) >> [ 0.047198] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 >> bytes) >> [ 0.048070] Initializing cgroup subsys io >> [ 0.048106] Initializing cgroup subsys memory >> [ 0.048153] Initializing cgroup subsys devices >> [ 0.048171] Initializing cgroup subsys freezer >> [ 0.048188] Initializing cgroup subsys net_cls >> [ 0.048202] Initializing cgroup subsys perf_event >> [ 0.048217] Initializing cgroup subsys net_prio >> [ 0.048241] Initializing cgroup subsys pids >> [ 0.048300] CPU: Testing write buffer coherency: ok >> [ 0.048361] ftrace: allocating 34469 entries in 102 pages >> [ 0.146019] CPU0: thread -1, cpu 0, socket -1, mpidr 0 >> [ 0.146150] Setting up static identity map for 0x80008280 - 0x800082e0 >> [ 0.150305] Brought up 1 CPUs >> [ 0.150330] SMP: Total of 1 processors activated (995.32 BogoMIPS). >> [ 0.150339] CPU: All CPU(s) started in SVC mode. >> [ 0.152069] devtmpfs: initialized >> [ 0.170126] VFP support v0.3: implementor 41 architecture 3 part 30 >> variant c rev 3 >> [ 0.190157] omap_hwmod: debugss: _wait_target_disable failed >> [ 0.231485] clocksource: jiffies: mask: 0xffffffff max_cycles: >> 0xffffffff, max_idle_ns: 7645041785100000 ns >> [ 0.231522] futex hash table entries: 256 (order: 2, 16384 bytes) >> [ 0.235643] xor: measuring software checksum speed >> [ 0.274812] arm4regs : 1219.000 MB/sec >> [ 0.314806] 8regs : 1092.000 MB/sec >> [ 0.354806] 32regs : 1089.000 MB/sec >> [ 0.394805] neon : 1747.000 MB/sec >> [ 0.394813] xor: using function: neon (1747.000 MB/sec) >> [ 0.394938] pinctrl core: initialized pinctrl subsystem >> [ 0.396972] NET: Registered protocol family 16 >> [ 0.400698] DMA: preallocated 1024 KiB pool for atomic coherent >> allocations >> [ 0.401942] cpuidle: using governor ladder >> [ 0.401960] cpuidle: using governor menu >> [ 0.407752] OMAP GPIO hardware version 0.1 >> [ 0.420018] No ATAGs? >> [ 0.420055] hw-breakpoint: debug architecture 0x4 unsupported. >> [ 0.420576] omap4_sram_init:Unable to allocate sram needed to handle >> errata I688 >> [ 0.420594] omap4_sram_init:Unable to get sram pool needed to handle >> errata I688 >> [ 0.498880] raid6: int32x1 gen() 263 MB/s >> [ 0.566912] raid6: int32x1 xor() 223 MB/s >> [ 0.634930] raid6: int32x2 gen() 330 MB/s >> [ 0.702811] raid6: int32x2 xor() 283 MB/s >> [ 0.770812] raid6: int32x4 gen() 328 MB/s >> [ 0.838820] raid6: int32x4 xor() 267 MB/s >> [ 0.906902] raid6: int32x8 gen() 300 MB/s >> [ 0.974927] raid6: int32x8 xor() 231 MB/s >> [ 1.042825] raid6: neonx1 gen() 1453 MB/s >> [ 1.110819] raid6: neonx1 xor() 846 MB/s >> [ 1.178836] raid6: neonx2 gen() 1936 MB/s >> [ 1.246826] raid6: neonx2 xor() 1197 MB/s >> [ 1.314846] raid6: neonx4 gen() 989 MB/s >> [ 1.382804] raid6: neonx4 xor() 827 MB/s >> [ 1.450810] raid6: neonx8 gen() 1037 MB/s >> [ 1.518810] raid6: neonx8 xor() 757 MB/s >> [ 1.518818] raid6: using algorithm neonx2 gen() 1936 MB/s >> [ 1.518825] raid6: .... xor() 1197 MB/s, rmw enabled >> [ 1.518832] raid6: using intx1 recovery algorithm >> [ 1.528201] edma 49000000.edma: TI EDMA DMA engine driver >> [ 1.532930] SCSI subsystem initialized >> [ 1.533369] libata version 3.00 loaded. >> [ 1.533720] usbcore: registered new interface driver usbfs >> [ 1.533810] usbcore: registered new interface driver hub >> [ 1.533917] usbcore: registered new device driver usb >> [ 1.534521] omap_i2c 44e0b000.i2c: could not find pctldev for node >> /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring >> probe >> [ 1.534577] omap_i2c 4819c000.i2c: could not find pctldev for node >> /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring >> probe >> [ 1.534703] media: Linux media interface: v0.10 >> [ 1.534764] Linux video capture interface: v2.00 >> [ 1.534983] pps_core: LinuxPPS API ver. 1 registered >> [ 1.534991] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 >> Rodolfo Giometti <giom...@linux.it> >> [ 1.535023] PTP clock support registered >> [ 1.535958] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 >> [ 1.537415] NetLabel: Initializing >> [ 1.537430] NetLabel: domain hash size = 128 >> [ 1.537436] NetLabel: protocols = UNLABELED CIPSOv4 >> [ 1.537500] NetLabel: unlabeled traffic allowed by default >> [ 1.537916] clocksource: Switched to clocksource timer1 >> [ 1.650267] NET: Registered protocol family 2 >> [ 1.651115] TCP established hash table entries: 4096 (order: 2, 16384 >> bytes) >> [ 1.651167] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) >> [ 1.651227] TCP: Hash tables configured (established 4096 bind 4096) >> [ 1.651304] UDP hash table entries: 256 (order: 1, 8192 bytes) >> [ 1.651326] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) >> [ 1.651655] NET: Registered protocol family 1 >> [ 1.652271] RPC: Registered named UNIX socket transport module. >> [ 1.652285] RPC: Registered udp transport module. >> [ 1.652292] RPC: Registered tcp transport module. >> [ 1.652299] RPC: Registered tcp NFSv4.1 backchannel transport module. >> [ 1.652953] Unpacking initramfs... >> [ 2.078116] Freeing initrd memory: 5804K (cfa55000 - d0000000) >> [ 2.078874] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 >> counters available >> [ 2.081627] audit: initializing netlink subsys (disabled) >> [ 2.081725] audit: type=2000 audit(2.012:1): initialized >> [ 2.092275] zbud: loaded >> [ 2.093031] VFS: Disk quotas dquot_6.6.0 >> [ 2.093317] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 >> bytes) >> [ 2.096066] NFS: Registering the id_resolver key type >> [ 2.096145] Key type id_resolver registered >> [ 2.096155] Key type id_legacy registered >> [ 2.096185] nfs4filelayout_init: NFSv4 File Layout Driver >> Registering... >> [ 2.096567] fuse init (API version 7.23) >> [ 2.097204] SGI XFS with ACLs, security attributes, realtime, no >> debug enabled >> [ 2.105762] Block layer SCSI generic (bsg) driver version 0.4 loaded >> (major 249) >> [ 2.106161] io scheduler noop registered >> [ 2.106180] io scheduler deadline registered >> [ 2.106255] io scheduler cfq registered (default) >> [ 2.107663] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 >> size 568 >> [ 2.109460] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc >> handle >> [ 2.111193] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled >> [ 2.114540] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, >> base_baud = 3000000) is a 8250 >> [ 2.127845] console [ttyS0] enabled >> [ 2.129400] [drm] Initialized drm 1.1.0 20060810 >> [ 2.181974] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 >> [ 2.182000] davinci_mdio 4a101000.mdio: detected phy mask fffffffe >> [ 2.182391] davinci_mdio: dt: updated phy_id[0] from >> phy_mask[fffffffe] >> [ 2.189520] libphy: 4a101000.mdio: probed >> [ 2.189556] davinci_mdio 4a101000.mdio: phy[0]: device >> 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 >> [ 2.190497] cpsw 4a100000.ethernet: Detected MACID = d0:39:72:3b:d9:be >> [ 2.190641] cpsw 4a100000.ethernet: cpts: overflow check period 2125 >> [ 2.192433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 2.192499] ehci-platform: EHCI generic platform driver >> [ 2.192687] ehci-omap: OMAP-EHCI Host Controller driver >> [ 2.193129] usbcore: registered new interface driver usb-storage >> [ 2.195502] 47401300.usb-phy supply vcc not found, using dummy >> regulator >> [ 2.198266] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk >> combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) >> [ 2.198286] musb-hdrc: MHDRC RTL version 2.0 >> [ 2.198295] musb-hdrc: setup fifo_mode 4 >> [ 2.198315] musb-hdrc: 28/31 max ep, 16384/16384 memory >> [ 2.199947] 47401b00.usb-phy supply vcc not found, using dummy >> regulator >> [ 2.202513] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk >> combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) >> [ 2.202531] musb-hdrc: MHDRC RTL version 2.0 >> [ 2.202539] musb-hdrc: setup fifo_mode 4 >> [ 2.202555] musb-hdrc: 28/31 max ep, 16384/16384 memory >> [ 2.202729] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver >> [ 2.202767] musb-hdrc musb-hdrc.1.auto: new USB bus registered, >> assigned bus number 1 >> [ 2.203055] usb usb1: New USB device found, idVendor=1d6b, >> idProduct=0002 >> [ 2.203069] usb usb1: New USB device strings: Mfr=3, Product=2, >> SerialNumber=1 >> [ 2.203079] usb usb1: Product: MUSB HDRC host driver >> [ 2.203088] usb usb1: Manufacturer: Linux 4.4.68-ti-r106 musb-hcd >> [ 2.203097] usb usb1: SerialNumber: musb-hdrc.1.auto >> [ 2.203993] hub 1-0:1.0: USB hub found >> [ 2.204055] hub 1-0:1.0: 1 port detected >> [ 2.214084] mousedev: PS/2 mouse device common for all mice >> [ 2.216603] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc >> as rtc0 >> [ 2.217446] i2c /dev entries driver >> [ 2.219282] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout >> 60 sec >> [ 2.219711] cpuidle: enable-method property 'ti,am3352' found >> operations >> [ 2.220421] omap_hsmmc 48060000.mmc: Got CD GPIO >> [ 2.283565] hidraw: raw HID events driver (C) Jiri Kosina >> [ 2.284311] usbcore: registered new interface driver usbhid >> [ 2.284325] usbhid: USB HID core driver >> [ 2.284619] ashmem: initialized >> [ 2.285455] remoteproc0: wkup_m3 is available >> [ 2.285471] remoteproc0: Note: remoteproc is still under development >> and considered experimental. >> [ 2.285479] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and >> backward compatibility isn't yet guaranteed. >> [ 2.289052] NET: Registered protocol family 10 >> [ 2.290931] mip6: Mobile IPv6 >> [ 2.290962] NET: Registered protocol family 17 >> [ 2.291110] Key type dns_resolver registered >> [ 2.291127] mpls_gso: MPLS GSO support >> [ 2.291426] omap_voltage_late_init: Voltage driver support not added >> [ 2.299156] PM: Cannot get wkup_m3_ipc handle >> [ 2.303997] ThumbEE CPU extension supported. >> [ 2.304035] Registering SWP/SWPB emulation handler >> [ 2.305095] registered taskstats version 1 >> [ 2.305298] zswap: loaded using pool lzo/zbud >> [ 2.309824] Btrfs loaded >> [ 2.314022] mmc0: host does not support reading read-only switch, >> assuming write-enable >> [ 2.315979] mmc0: new high speed SDHC card at address e624 >> [ 2.322231] mmcblk0: mmc0:e624 SU16G 14.8 GiB >> [ 2.324053] mmcblk0: p1 >> [ 2.344476] Key type encrypted registered >> [ 2.347739] input: tps65217_pwr_but as >> /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0 >> [ 2.367643] mmc1: MAN_BKOPS_EN bit is not set >> [ 2.372351] mmc1: new high speed MMC card at address 0001 >> [ 2.373478] mmcblk1: mmc1:0001 MMC04G 3.60 GiB >> [ 2.373776] tps65217 0-0024: TPS65217 ID 0xe version 1.2 >> [ 2.374463] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 >> bytes/write >> [ 2.374723] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz >> [ 2.376877] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 >> bytes/write >> [ 2.377315] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 >> bytes/write >> [ 2.377709] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 >> bytes/write >> [ 2.378239] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 >> bytes/write >> [ 2.378293] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz >> [ 2.379101] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB >> [ 2.379889] remoteproc0: powering up wkup_m3 >> [ 2.379955] remoteproc0: Booting fw image am335x-pm-firmware.elf, >> size 217148 >> [ 2.380222] remoteproc0: remote processor wkup_m3 is now up >> [ 2.380245] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = >> 0x192 >> [ 2.380970] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB >> [ 2.382466] mmcblk1: p1 >> [ 2.386092] bone_capemgr bone_capemgr: Baseboard: >> 'A335BNLT,00A5,5002BBBK8600' >> [ 2.386133] bone_capemgr bone_capemgr: >> compatible-baseboard=ti,beaglebone-black - #slots=4 >> [ 2.425934] bone_capemgr bone_capemgr: slot #0: No cape found >> [ 2.465923] bone_capemgr bone_capemgr: slot #1: No cape found >> [ 2.505924] bone_capemgr bone_capemgr: slot #2: No cape found >> [ 2.545922] bone_capemgr bone_capemgr: slot #3: No cape found >> [ 2.546028] bone_capemgr bone_capemgr: initialized OK. >> [ 2.548168] PM: bootloader does not support rtc-only! >> [ 2.549187] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 >> 00:00:00 UTC (946684800) >> [ 2.549216] of_cfs_init >> [ 2.549350] of_cfs_init: OK >> [ 2.555005] PM: Hibernation image not present or could not be loaded. >> [ 2.556439] Freeing unused kernel memory: 736K (c0ed6000 - c0f8e000) >> [ 2.691867] random: systemd-udevd: uninitialized urandom read (16 >> bytes read, 14 bits of entropy available) >> [ 2.692554] random: systemd-udevd: uninitialized urandom read (16 >> bytes read, 14 bits of entropy available) >> [ 2.692671] random: systemd-udevd: uninitialized urandom read (16 >> bytes read, 14 bits of entropy available) >> [ 2.711363] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 2.711748] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 2.711925] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 2.712618] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 2.713195] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 2.713692] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 2.714595] random: udevadm: uninitialized urandom read (16 bytes >> read, 14 bits of entropy available) >> [ 3.945620] ti-pruss 4a300000.pruss: creating PRU cores and other >> child platform devices >> [ 3.970267] irq: no irq domain found for >> /ocp/pruss@4a300000/intc@4a320000 ! >> [ 3.971159] irq: no irq domain found for >> /ocp/pruss@4a300000/intc@4a320000 ! >> [ 4.009459] remoteproc1: 4a334000.pru0 is available >> [ 4.009485] remoteproc1: Note: remoteproc is still under development >> and considered experimental. >> [ 4.009494] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and >> backward compatibility isn't yet guaranteed. >> [ 4.012325] pru-rproc 4a334000.pru0: booting the PRU core manually >> [ 4.012354] remoteproc1: powering up 4a334000.pru0 >> [ 4.012623] remoteproc1: Booting fw image am335x-pru0-fw, size 36296 >> [ 4.012694] remoteproc1: remote processor 4a334000.pru0 is now up >> [ 4.012729] pru-rproc 4a334000.pru0: PRU rproc node >> /ocp/pruss@4a300000/pru0@4a334000 probed successfully >> [ 4.026653] remoteproc2: 4a338000.pru1 is available >> [ 4.026672] remoteproc2: Note: remoteproc is still under development >> and considered experimental. >> [ 4.026680] remoteproc2: THE BINARY FORMAT IS NOT YET FINALIZED, and >> backward compatibility isn't yet guaranteed. >> [ 4.030624] pru-rproc 4a338000.pru1: booting the PRU core manually >> [ 4.030656] remoteproc2: powering up 4a338000.pru1 >> [ 4.030941] remoteproc2: Booting fw image am335x-pru1-fw, size 35384 >> [ 4.031015] remoteproc2: remote processor 4a338000.pru1 is now up >> [ 4.031049] pru-rproc 4a338000.pru1: PRU rproc node >> /ocp/pruss@4a300000/pru1@4a338000 probed successfully >> [ 4.593895] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data >> mode. Opts: (null) >> [ 5.271150] systemd[1]: System time before build time, advancing >> clock. >> [ 5.380373] ip_tables: (C) 2000-2006 Netfilter Core Team >> [ 5.444177] systemd[1]: systemd 232 running in system mode. (+PAM >> +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP >> +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) >> [ 5.444857] systemd[1]: Detected architecture arm. >> [ 5.447125] systemd[1]: Set hostname to <beaglebone>. >> [ 6.325398] systemd[1]: Listening on Journal Socket. >> [ 6.326742] systemd[1]: Listening on Journal Socket (/dev/log). >> [ 6.327315] systemd[1]: Started Dispatch Password Requests to Console >> Directory Watch. >> [ 6.327764] systemd[1]: Started Forward Password Requests to Wall >> Directory Watch. >> [ 6.328181] systemd[1]: Listening on /dev/initctl Compatibility Named >> Pipe. >> [ 6.328528] systemd[1]: Listening on Syslog Socket. >> [ 6.330392] systemd[1]: Set up automount Arbitrary Executable File >> Formats File System Automount Point. >> [ 6.330859] systemd[1]: Listening on udev Kernel Socket. >> [ 6.331068] systemd[1]: Reached target Encrypted Volumes. >> [ 6.332340] systemd[1]: Created slice System Slice. >> [ 6.333538] systemd[1]: Created slice system-getty.slice. >> [ 6.339068] systemd[1]: Starting Create list of required static >> device nodes for the current kernel... >> [ 6.369052] systemd[1]: Starting Load Kernel Modules... >> [ 6.396261] systemd[1]: Listening on udev Control Socket. >> [ 6.417680] systemd[1]: Mounting POSIX Message Queue File System... >> [ 6.470369] systemd[1]: Reached target Remote File Systems. >> [ 6.508352] systemd[1]: Mounting /sys/kernel/debug... >> [ 6.533689] systemd[1]: Listening on Journal Audit Socket. >> [ 6.646881] systemd[1]: Starting Journal Service... >> [ 6.647236] systemd[1]: Reached target Paths. >> [ 6.648542] systemd[1]: Created slice User and Session Slice. >> [ 6.648828] systemd[1]: Reached target Slices. >> [ 6.715234] systemd[1]: Created slice system-serial\x2dgetty.slice. >> [ 6.715738] systemd[1]: Reached target Swap. >> [ 6.716169] systemd[1]: Listening on fsck to fsckd communication >> Socket. >> [ 6.750791] systemd[1]: Starting Remount Root and Kernel File >> Systems... >> [ 6.800368] systemd[1]: Starting Uncomplicated firewall... >> [ 6.953876] systemd[1]: Mounted POSIX Message Queue File System. >> [ 6.987273] systemd[1]: Mounted /sys/kernel/debug. >> [ 6.989330] systemd[1]: Started Create list of required static device >> nodes for the current kernel. >> [ 7.012462] systemd[1]: Started Load Kernel Modules. >> [ 7.024685] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro >> [ 7.040681] systemd[1]: Started Remount Root and Kernel File Systems. >> [ 7.059287] systemd[1]: Started Uncomplicated firewall. >> [ 7.125013] systemd[1]: Starting udev Coldplug all Devices... >> [ 7.148552] systemd[1]: Starting Load/Save Random Seed... >> [ 7.258243] systemd[1]: Mounting Configuration File System... >> [ 7.334795] systemd[1]: Mounting FUSE Control File System... >> [ 7.412609] systemd[1]: Starting Apply Kernel Variables... >> [ 7.614736] systemd[1]: Starting Create Static Device Nodes in /dev... >> [ 7.732042] systemd[1]: Mounted FUSE Control File System. >> [ 7.732449] systemd[1]: Mounted Configuration File System. >> [ 7.733275] systemd[1]: Started Journal Service. >> [ 8.591203] systemd-journald[199]: Received request to flush runtime >> journal from PID 1 >> [ 11.582053] random: nonblocking pool is initialized >> [ 14.593293] nf_conntrack version 0.5.0 (7809 buckets, 31236 max) >> [ 15.503329] using random self ethernet address >> [ 15.503359] using random host ethernet address >> [ 15.612457] using random self ethernet address >> [ 15.612487] using random host ethernet address >> [ 15.666744] net eth0: initializing cpsw version 1.12 (0) >> [ 15.666776] net eth0: initialized cpsw ale version 1.4 >> [ 15.666787] net eth0: ALE Table size 1024 >> [ 15.811063] net eth0: phy found : id is : 0x7c0f1 >> [ 15.876945] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >> [ 15.932717] Mass Storage Function, version: 2009/09/11 >> [ 15.932751] LUN: removable file: (no medium) >> [ 16.302180] usb0: HOST MAC d0:39:72:3b:d9:bf >> [ 16.303720] usb0: MAC d0:39:72:3b:d9:c0 >> [ 16.315427] usb1: HOST MAC d0:39:72:3b:d9:c2 >> [ 16.315807] usb1: MAC d0:39:72:3b:d9:c3 >> [ 18.015554] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready >> [ 18.308196] Process accounting resumed >> [ 18.632550] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready >> [ 19.842946] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - >> flow control rx/tx >> [ 19.843038] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> [ 20.073708] 8021q: 802.1Q VLAN Support v1.8 >> [ 20.073807] 8021q: adding VLAN 0 to HW filter on device eth0 >> [ 32.839888] omap_rng 48310000.rng: OMAP Random Number Generator ver. >> 20 >> [ 33.272297] tda998x 0-0070: found TDA19988 >> [ 33.277478] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops >> [tda998x]) >> [ 33.277518] [drm] Supports vblank timestamp caching Rev 2 >> (21.10.2013). >> [ 33.277526] [drm] No driver support for vblank timestamp query. >> [ 33.295817] tilcdc 4830e000.lcdc: No connectors reported connected >> with modes >> [ 33.295864] [drm] Cannot find any crtc or sizes - going 1024x768 >> [ 34.206347] Console: switching to colour frame buffer device 128x48 >> [ 34.626201] tilcdc 4830e000.lcdc: fb0: frame buffer device >> [ 34.626251] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 >> [ 37.368582] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 >> [ 37.506564] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 >> [ 38.154607] [drm] Initialized pvr 1.14.3699939 20110701 on minor 1 >> [ 42.764748] bone_capemgr bone_capemgr: part_number 'cape-universal', >> version 'N/A' >> [ 42.764792] bone_capemgr bone_capemgr: slot #4: override >> [ 42.764808] bone_capemgr bone_capemgr: Using override eeprom data at >> slot 4 >> [ 42.764826] bone_capemgr bone_capemgr: slot #4: 'Override Board >> Name,00A0,Override Manuf,cape-universal' >> [ 43.371027] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 >> [ 43.371273] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 >> [ 43.371454] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 >> [ 43.371624] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 >> [ 43.371792] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 >> [ 43.371952] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 >> [ 43.372117] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 >> [ 43.372280] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 >> [ 43.372445] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 >> [ 43.372614] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 >> [ 43.394347] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 >> [ 43.394589] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 >> [ 43.394789] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 >> [ 43.394961] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 >> [ 43.395131] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 >> [ 43.395297] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 >> [ 43.395456] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 >> [ 43.395625] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 >> [ 43.395788] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 >> [ 43.395949] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 >> [ 43.396118] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 >> [ 43.396372] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 >> [ 43.396555] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 >> [ 43.396726] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 >> [ 43.396888] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 >> [ 43.397054] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 >> [ 43.397218] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 >> [ 43.397379] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 >> [ 43.397546] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 >> [ 43.397710] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 >> [ 43.397874] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 >> [ 43.418470] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 >> [ 43.418700] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 >> [ 43.418714] gpio-of-helper ocp:cape-universal: ready >> [ 43.434371] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 199, >> base_baud = 3000000) is a 8250 >> [ 43.454354] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 200, >> base_baud = 3000000) is a 8250 >> [ 43.462577] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp >> mapping ok >> [ 43.470552] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 201, >> base_baud = 3000000) is a 8250 >> [ 43.495255] eqep 48300180.eqep: ver. 1.0 >> [ 43.516204] eqep 48302180.eqep: ver. 1.0 >> [ 43.559178] eqep 48304180.eqep: ver. 1.0 >> [ 43.586428] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz >> [ 43.601089] bone_capemgr bone_capemgr: slot #4: dtbo >> 'cape-universal-00A0.dtbo' loaded; overlay id #0 >> [ 55.362249] CAN device driver interface >> [ 55.435910] c_can_platform 481cc000.can: c_can_platform device >> registered (regs=fa1cc000, irq=210) >> [ 55.483194] c_can_platform 481d0000.can: c_can_platform device >> registered (regs=fa1d0000, irq=211) >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/52e1dd9b-88be-473f-a879-1d90778b769f%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/52e1dd9b-88be-473f-a879-1d90778b769f%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORrBG%3DnHkCU%2B2iUYEO86XN4AT4Hf8s8unY1VYjkTp%2BcnGw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
